Daily Papers

Does personalizing what a reader sees pay off, and where does it stop? Using a social web highlighter and a co-readership identity control (the same document highlighted by many users, which holds document and topic fixed and asks whether a person's own history predicts their marks better than another reader's does), we map the shape and limits of personalization across reading altitudes. At the document altitude we give the clean, leakage-free, identity-controlled measurement that prior next-document evaluations could only upper-bound: a person's history identifies which documents in a co-reading neighborhood are theirs, with an own-versus-other gap of +0.169 against community negatives and +0.119 against topic-matched hard negatives (both highly significant); a content-based arm suggests the signal is not purely title-driven but is largely thematic. This is comparable to the span-level selection signal (+0.14) from our prior work: the selection signal is of comparable magnitude across altitudes (+0.12 to +0.17), most of it stable topic preference. At the sentence altitude, a two-stage personalized auto-highlight (an impersonal model proposes candidates, a personal model re-ranks them) does not improve on its impersonal baseline: two off-the-shelf zero-shot LLMs, including a frontier model, predict highlight locations worse than a lead baseline, and personal re-ranking is beaten by the salience order even on the highest-recall candidate pool, so the null is not merely a Stage-1 ceiling artifact. Measurable personalization appears primarily at the selection layer: modest (~+0.13), topic-dominated, with no reliable gain at the salience layer. We also surface a control-in-negatives bias that inflated our document gap to a spurious +0.227 until audited. Going beyond the shared salience layer may be better approached by aggregating individuals than by personalizing them harder.

Large reasoning models (LRMs) achieve state-of-the-art performance on challenging benchmarks by generating long chains of intermediate steps, but their inference cost is dominated by decoding, where each new token must attend to the entire growing sequence. Existing sparse attention methods reduce computation by pruning the key-value (KV) cache, yet they suffer from severe accuracy degradation on reasoning tasks due to cumulative selection errors and the dynamic importance of tokens over long derivations. We present DELTA, a training-free sparse attention mechanism that achieves computational efficiency without sacrificing model accuracy. DELTA partitions transformer layers into three groups: initial layers that use full attention, a small set of selection layers that identify salient tokens via aggregated head-level attention scores, and subsequent sparse-attention layers that attend only to the selected subset. This design preserves the full KV cache in GPU memory for accuracy, while avoiding expensive full-attention computation over many layers. On reasoning benchmarks such as AIME and GPQA-Diamond, DELTA matches or surpasses full attention in accuracy, while reducing the number of attended tokens by up to 5times and delivering 1.5times end-to-end speedup. Our results show that selective reuse of intermediate attention maps offers a robust path toward efficient long-context reasoning.

Document-level Neural Machine Translation (DocNMT) has been proven crucial for handling discourse phenomena by introducing document-level context information. One of the most important directions is to input the whole document directly to the standard Transformer model. In this case, efficiency becomes a critical concern due to the quadratic complexity of the attention module. Existing studies either focus on the encoder part, which cannot be deployed on sequence-to-sequence generation tasks, e.g., Machine Translation (MT), or suffer from a significant performance drop. In this work, we keep the translation performance while gaining 20\% speed up by introducing extra selection layer based on lightweight attention that selects a small portion of tokens to be attended. It takes advantage of the original attention to ensure performance and dimension reduction to accelerate inference. Experimental results show that our method could achieve up to 95\% sparsity (only 5\% tokens attended) approximately, and save 93\% computation cost on the attention module compared with the original Transformer, while maintaining the performance.

Multi-hop question answering in retrieval-augmented gener?ation (RAG) often benefits from retrieving beyond the few candidates that will finally be read: narrow retrieval can miss an indispensable hop, while expanded retrieval introduces topical distractors. This challenge is not tied to a particu?lar knowledge-base format. Candidate pools may come from standalone retrievers, standard RAG backends, or graph-based retrieval pipelines. What is needed is a query-aware selection layer that can use relational structure to filter candidates be?fore generation. PAGE-RAG addresses this setting by using a graph as a temporary selection structure, rather than assum?ing a graph-structured knowledge base. It builds a query-local graph over retrieved candidates, records why candidates are connected, and treats each connection as a support hypothe?sis rather than support itself. We identify the resulting failure mode as a connectivity-support gap: connected candidates do not necessarily support the answer. We propose PAGE-RAG, a Provenance-Aware Graph Evidence promotion method that scores candidate paths with relevance, source-tracing meta?data, specificity, hubness, noise, and coherence signals, and applies minimal sufficient selection to promote supporting facts into a compact reader context. PAGE-RAG can serve as a complete retrieval-to-reading pipeline, and the same promo?tion stage can be inserted after existing retrieval or RAG sys?tems without replacing their upstream retrieval logic. Across three multi-hop QA benchmarks under the same final bud?get, PAGE-RAG improves support F1 and answer F1 by 10.4 and 3.3 points on a weighted average over a strong retriever. As a plug-in, PAGE-RAG further improves all reported RAG backends, including reasoning-oriented, compression-based, graph-based, and document/chunk-level systems.

Latent factor models are the driving forces of the state-of-the-art recommender systems, with an important insight of vectorizing raw input features into dense embeddings. The dimensions of different feature embeddings are often set to a same value empirically, which limits the predictive performance of latent factor models. Existing works have proposed heuristic or reinforcement learning-based methods to search for mixed feature embedding dimensions. For efficiency concern, these methods typically choose embedding dimensions from a restricted set of candidate dimensions. However, this restriction will hurt the flexibility of dimension selection, leading to suboptimal performance of search results. In this paper, we propose Differentiable Neural Input Search (DNIS), a method that searches for mixed feature embedding dimensions in a more flexible space through continuous relaxation and differentiable optimization. The key idea is to introduce a soft selection layer that controls the significance of each embedding dimension, and optimize this layer according to model's validation performance. DNIS is model-agnostic and thus can be seamlessly incorporated with existing latent factor models for recommendation. We conduct experiments with various architectures of latent factor models on three public real-world datasets for rating prediction, Click-Through-Rate (CTR) prediction, and top-k item recommendation. The results demonstrate that our method achieves the best predictive performance compared with existing neural input search approaches with fewer embedding parameters and less time cost.

Training multi-billion to trillion-parameter language models efficiently on GPU clusters requires leveraging multiple parallelism strategies. We present Galvatron, a novel open-source framework (dubbed 'Optimus-Megatron' in the implementation) that dynamically combines data parallelism, tensor model parallelism, and pipeline parallelism to optimize training throughput. Built atop PyTorch and integrating NVIDIA's Megatron-LM and Microsoft's DeepSpeed, Galvatron automatically selects and adjusts parallelism strategies in real time based on model architecture, hardware, and training dynamics. This paper details Galvatron's key features -- automatic hybrid parallelism selection, layer-wise and phase-wise strategy optimization, and runtime adaptation -- and contrasts them with existing static frameworks. We describe the system's technical stack, including its use of DeepSpeed's ZeRO and NCCL communication, and provide an in-depth implementation overview of its core modules (profilers, strategy selector, parallelism manager). We then illustrate how Galvatron can be seamlessly integrated into existing training pipelines with minimal code modifications, providing companies a plug-and-play solution for efficient large-model training. Finally, we situate Galvatron in context with related efforts (NVIDIA Megatron-LM, Microsoft DeepSpeed, Google GShard, Meta FairScale, etc.), highlighting how it advances the state of the art in distributed deep learning. References to the GitHub repository and relevant literature are provided throughout.

Graph In-Context Learning, with the ability to adapt pre-trained graph models to novel and diverse downstream graphs without updating any parameters, has gained much attention in the community. The key to graph in-context learning is to perform downstream graphs conditioned on chosen prompt examples. Existing methods randomly select subgraphs or edges as prompts, leading to noisy graph prompts and inferior model performance. Additionally, due to the gap between pre-training and testing graphs, when the number of classes in the testing graphs is much greater than that in the training, the in-context learning ability will also significantly deteriorate. To tackle the aforementioned challenges, we develop a multi-stage adaptive prompt optimization method GraphPrompter, which optimizes the entire process of generating, selecting, and using graph prompts for better in-context learning capabilities. Firstly, Prompt Generator introduces a reconstruction layer to highlight the most informative edges and reduce irrelevant noise for graph prompt construction. Furthermore, in the selection stage, Prompt Selector employs the k-nearest neighbors algorithm and pre-trained selection layers to dynamically choose appropriate samples and minimize the influence of irrelevant prompts. Finally, we leverage a Prompt Augmenter with a cache replacement strategy to enhance the generalization capability of the pre-trained model on new datasets. Extensive experiments show that GraphPrompter effectively enhances the in-context learning ability of graph models. On average across all the settings, our approach surpasses the state-of-the-art baselines by over 8%. Our code is released at https://github.com/karin0018/GraphPrompter.

Large language models (LLMs) have driven significant advancements across diverse NLP tasks, with long-context models gaining prominence for handling extended inputs. However, the expanding key-value (KV) cache size required by Transformer architectures intensifies the memory constraints, particularly during the decoding phase, creating a significant bottleneck. Existing sparse attention mechanisms designed to address this bottleneck have two limitations: (1) they often fail to reliably identify the most relevant tokens for attention, and (2) they overlook the spatial coherence of token selection across consecutive Transformer layers, which can lead to performance degradation and substantial overhead in token selection. This paper introduces TidalDecode, a simple yet effective algorithm and system for fast and accurate LLM decoding through position persistent sparse attention. TidalDecode leverages the spatial coherence of tokens selected by existing sparse attention methods and introduces a few token selection layers that perform full attention to identify the tokens with the highest attention scores, while all other layers perform sparse attention with the pre-selected tokens. This design enables TidalDecode to substantially reduce the overhead of token selection for sparse attention without sacrificing the quality of the generated results. Evaluation on a diverse set of LLMs and tasks shows that TidalDecode closely matches the generative performance of full attention methods while reducing the LLM decoding latency by up to 2.1x.

Test Time Adaptation (TTA) addresses the problem of distribution shift by adapting a pretrained model to a new domain during inference. When faced with challenging shifts, most methods collapse and perform worse than the original pretrained model. In this paper, we find that not all layers are equally receptive to the adaptation, and the layers with the most misaligned gradients often cause performance degradation. To address this, we propose GALA, a novel layer selection criterion to identify the most beneficial updates to perform during test time adaptation. This criterion can also filter out unreliable samples with noisy gradients. Its simplicity allows seamless integration with existing TTA loss functions, thereby preventing degradation and focusing adaptation on the most trainable layers. This approach also helps to regularize adaptation to preserve the pretrained features, which are crucial for handling unseen domains. Through extensive experiments, we demonstrate that the proposed layer selection framework improves the performance of existing TTA approaches across multiple datasets, domain shifts, model architectures, and TTA losses.

Recent studies on hallucination detection have shown that hallucination-related signals are more strongly encoded in intermediate layers than in the final layer of large language models (LLMs). Although a growing body of work has sought to exploit this property for hallucination detection, how to automate the selection of high-performing layers remains underexplored, and principled methods for this purpose are still lacking. To address this gap, we first propose several hypotheses for why such signals emerge in intermediate layers and evaluate corresponding criteria for automatic layer selection across diverse LLM architectures, scales, and tasks, covering both question answering and summarization hallucination detection benchmarks. However, we find that none of these criteria consistently delivers satisfactory performance. We therefore propose a new selection criterion, First Effective Peak of Intrinsic Dimension (FEPoID), which consistently identify optimal or near-optimal layers and outperforms both the aforementioned criteria and existing hallucination detection baselines. FEPoID is training-free and incurs negligible computational overhead. In addition, we study the generation behaviors of LLMs and introduce a simple yet effective truncation strategy, which further amplifies hallucination-related signals and substantially improves overall detection performance. Code is publicly available at https://github.com/DesoloYw/Automatic-Layer-Selection-for-Hallucination-Detection.git

Recently, foundation models based on Vision Transformers (ViTs) have become widely available. However, their fine-tuning process is highly resource-intensive, and it hinders their adoption in several edge or low-energy applications. To this end, in this paper we introduce an efficient fine-tuning method for ViTs called ALaST (Adaptive Layer Selection Fine-Tuning for Vision Transformers) to speed up the fine-tuning process while reducing computational cost, memory load, and training time. Our approach is based on the observation that not all layers are equally critical during fine-tuning, and their importance varies depending on the current mini-batch. Therefore, at each fine-tuning step, we adaptively estimate the importance of all layers and we assign what we call ``compute budgets'' accordingly. Layers that were allocated lower budgets are either trained with a reduced number of input tokens or kept frozen. Freezing a layer reduces the computational cost and memory usage by preventing updates to its weights, while discarding tokens removes redundant data, speeding up processing and reducing memory requirements. We show that this adaptive compute allocation enables a nearly-optimal schedule for distributing computational resources across layers, resulting in substantial reductions in training time (up to 1.5x), FLOPs (up to 2x), and memory load (up to 2x) compared to traditional full fine-tuning approaches. Additionally, it can be successfully combined with other parameter-efficient fine-tuning methods, such as LoRA.

Knowledge distillation (KD) is a popular method of transferring knowledge from a large "teacher" model to a small "student" model. KD can be divided into two categories: prediction matching and intermediate-layer matching. We explore an intriguing phenomenon: layer-selection strategy does not matter (much) in intermediate-layer matching. In this paper, we show that seemingly nonsensical matching strategies such as matching the teacher's layers in reverse still result in surprisingly good student performance. We provide an interpretation for this phenomenon by examining the angles between teacher layers viewed from the student's perspective.

Low-Rank Adaptation (LoRA) has become the dominant parameter-efficient fine-tuning method for large language models, yet standard practice applies LoRA adapters uniformly to all transformer layers regardless of their relevance to the downstream task. We introduce Aletheia, a gradient-guided layer selection method that identifies the most task-relevant layers via a lightweight gradient probe and applies LoRA adapters only to those layers with asymmetric rank allocation. Across 81 experiment rows covering 14 successful models from 8 architecture families (0.5B-72B parameters, including dense and Mixture-of-Experts architectures), with one additional documented failed Pythia/GPT-NeoX attempt in Campaign 2, Aletheia achieves a 15-28% training speedup (mean 23.1%, p < 0.001) with bounded extra forgetting and broadly matched downstream behavior on the evaluated MMLU, GSM8K, and HumanEval benchmark pack. Across the tested families and scales, Campaign 1 shows a 100% per-model speed win rate and Campaign 2 shows broadly preserved downstream behavior within a bounded-degradation framing. Together these results support a practical model-economics claim: intelligent layer selection can make LoRA fine-tuning materially more efficient without introducing major downstream damage on the evaluated set.

REPresentation Alignment (REPA) improves the training of generative flow models by aligning intermediate hidden states with pretrained teacher features, but its effectiveness in token-conditioned audio Flow Matching critically depends on the choice of supervised layers, which is typically made heuristically based on the depth. In this work, we introduce Attribution-Guided REPresentation Alignment (AG-REPA), a novel causal layer selection strategy for representation alignment in audio Flow Matching. Firstly, we find that layers that best store semantic/acoustic information (high teacher-space similarity) are not necessarily the layers that contribute most to the velocity field that drives generation, and we call it Store-Contribute Dissociation (SCD). To turn this insight into an actionable training guidance, we propose a forward-only gate ablation (FoG-A) that quantifies each layer's causal contribution via the induced change in the predicted velocity field, enabling sparse layer selection and adaptive weighting for alignment. Across unified speech and general-audio training (LibriSpeech + AudioSet) under different token-conditioning topologies, AG-REPA consistently outperforms REPA baselines. Overall, our results show that alignment is most effective when applied to the causally dominant layers that drive the velocity field, rather than to layers that are representationally rich but functionally passive.

Speech foundation models often struggle in low-resource domains due to domain mismatch and data scarcity. We propose Gumbel-BEARD, a domain adaptation framework that automates Whisper encoder layer selection via an end-to-end trainable hard Gumbel-Softmax selector. It enables self-supervised adaptation with a BEST-RQ objective that dynamically adapts to target acoustic characteristics without manual tuning. Experiments on the MyST child speech corpus demonstrate efficiency and scalability: with 10 h of labeled data for fine-tuning, our method matches a fully supervised baseline trained on the complete 133 h labeled set. We establish new state-of-the-art word error rates (WERs) of 8.21% using Whisper-medium on MyST and 11.06% using Whisper-small on the OGI Spontaneous dataset. Evaluation on CORAAL further confirms robustness to adult dialectal domain shifts, with up to 6% relative WER reduction, highlighting the generalizability of our approach to diverse low-resource conditions.

Distilling pretrained softmax attention Transformers into more efficient hybrid architectures that interleave softmax and linear attention layers is a promising approach for improving the inference efficiency of LLMs without requiring expensive pretraining from scratch. A critical factor in the conversion process is layer selection, i.e., deciding on which layers to convert to linear attention variants. This paper describes a simple and efficient recipe for layer selection that uses layer importance scores derived from a small amount of training on generic text data. Once the layers have been selected we use a recent pipeline for the distillation process itself \citep[RADLADS;][]{goldstein2025radlads}, which consists of attention weight transfer, hidden state alignment, KL-based distribution matching, followed by a small amount of finetuning. We find that this approach is more effective than existing approaches for layer selection, including heuristics that uniformly interleave linear attentions based on a fixed ratio, as well as more involved approaches that rely on specialized diagnostic datasets.

Despite significant progress in alignment, large language models (LLMs) remain vulnerable to adversarial attacks that elicit harmful behaviors. Activation steering techniques offer a promising inference-time intervention approach, but existing methods suffer from critical limitations: activation addition requires careful coefficient tuning and is sensitive to layer-specific norm variations, while directional ablation provides only binary control. Recent work on Angular Steering introduces continuous control via rotation in a 2D subspace, but its practical implementation violates norm preservation, causing distribution shift and generation collapse, particularly in models below 7B parameters. We propose Selective Steering, which addresses these limitations through two key innovations: (1) a mathematically rigorous norm-preserving rotation formulation that maintains activation distribution integrity, and (2) discriminative layer selection that applies steering only where feature representations exhibit opposite-signed class alignment. Experiments across nine models demonstrate that Selective Steering achieves 5.5x higher attack success rates than prior methods while maintaining zero perplexity violations and approximately 100\% capability retention on standard benchmarks. Our approach provides a principled, efficient framework for controllable and stable LLM behavior modification. Code: https://github.com/knoveleng/steering

Although large language models (LLMs) have achieved remarkable success across various domains, their considerable scale necessitates substantial computational resources, posing significant challenges for deployment in resource-constrained environments. Layer pruning, as a simple yet effective compression method, removes layers of a model directly, reducing computational overhead. However, what are the best practices for layer pruning in LLMs? Are sophisticated layer selection metrics truly effective? Does the LoRA (Low-Rank Approximation) family, widely regarded as a leading method for pruned model fine-tuning, truly meet expectations when applied to post-pruning fine-tuning? To answer these questions, we dedicate thousands of GPU hours to benchmarking layer pruning in LLMs and gaining insights across multiple dimensions. Our results demonstrate that a simple approach, i.e., pruning the final 25\% of layers followed by fine-tuning the lm\_head and the remaining last three layer, yields remarkably strong performance. Following this guide, we prune Llama-3.1-8B-It and obtain a model that outperforms many popular LLMs of similar size, such as ChatGLM2-6B, Vicuna-7B-v1.5, Qwen1.5-7B and Baichuan2-7B. We release the optimal model weights on Huggingface, and the code is available on GitHub.

Multimodal Large Language Models (MLLMs) have made significant advancements in recent years, with visual features playing an increasingly critical role in enhancing model performance. However, the integration of multi-layer visual features in MLLMs remains underexplored, particularly with regard to optimal layer selection and fusion strategies. Existing methods often rely on arbitrary design choices, leading to suboptimal outcomes. In this paper, we systematically investigate two core aspects of multi-layer visual feature fusion: (1) selecting the most effective visual layers and (2) identifying the best fusion approach with the language model. Our experiments reveal that while combining visual features from multiple stages improves generalization, incorporating additional features from the same stage typically leads to diminished performance. Furthermore, we find that direct fusion of multi-layer visual features at the input stage consistently yields superior and more stable performance across various configurations. We make all our code publicly available: https://github.com/EIT-NLP/Layer_Select_Fuse_for_MLLM.

Federated learning (FL) has emerged as a promising paradigm for fine-tuning foundation models using distributed data in a privacy-preserving manner. Under limited computational resources, clients often find it more practical to fine-tune a selected subset of layers, rather than the entire model, based on their task-specific data. In this study, we provide a thorough theoretical exploration of selective layer fine-tuning in FL, emphasizing a flexible approach that allows the clients to adjust their selected layers according to their local data and resources. We theoretically demonstrate that the layer selection strategy has a significant impact on model convergence in two critical aspects: the importance of selected layers and the heterogeneous choices across clients. Drawing from these insights, we further propose a strategic layer selection method that utilizes local gradients and regulates layer selections across clients. The extensive experiments on both image and text datasets demonstrate the effectiveness of the proposed strategy compared with several baselines, highlighting its advances in identifying critical layers that adapt to the client heterogeneity and training dynamics in FL.

Speech Quality Assessment (SQA) is essential for modern speech technologies, and recent non-intrusive SQA predictors increasingly rely on Speech Foundation Models (SFMs). However, because SFMs expose representations from many layers, it remains unclear which depths are most informative for MOS prediction and how multi-layer information should be combined reliably across backbones and datasets. We benchmark ten SFMs on four MOS datasets under three regimes: full fine-tuning, last-layer probing with a frozen encoder, and naive cross-layer weighted aggregation. We find that the best layer is strongly backbone- and dataset-dependent, and that naive weighted fusion can be unstable across settings. We further evaluate a layer-calibrated aggregation variant that applies per-layer adapters before pooling, which improves the robustness of multi-layer fusion and narrows the gap to full fine-tuning while keeping the backbone frozen.

Autoregressive generation in large language models (LLMs) conventionally decodes from the final layer, assuming that deeper representations yield more reliable next-token predictions. We revisit this assumption by revealing a recurring Guess-Refine-Perturb dynamic: early layers form coarse guesses, intermediate layers refine reasoning-relevant semantics, and final layers can perturb these refined predictions toward generic or alignment-preferred tokens. We introduce Confident Decoding, a training-free decoding strategy that dynamically selects the most reliable near-final layer through entropy-guided conservative backward search. We further provide a theoretical formulation of layer selection as an optimal stopping problem, showing that under bounded projection noise and dominant late-stage alignment perturbation, our search rule filters perturbation while bounding the loss relative to the oracle refinement layer. Experiments across dense and Mixture-of-Experts LLMs demonstrate consistent gains on challenging reasoning benchmarks, including GPQA-Diamond, Omni-MATH, and HLE, with zero memory overhead and less than 2% latency increase. These results suggest dynamically bypassing final-layer perturbations can unlock stronger reasoning behavior from aligned LLMs.

Representation-level unlearning intervenes on the intermediate hidden states of LLMs. Although knowledge is distributed across layers, existing methods operate at a single fixed layer for the entire forget set. We ask whether such a fixed layer is sufficient. To answer this, we design a hijacking experiment that grafts hidden states of the target model into an oracle trained only on the retain set. The oracle cannot produce the forget answer on its own, yet it produces the answer from the grafted state. Thus, the answer is formed at an intermediate layer and merely read out afterward, so unlearning should focus on formation, not readout. Moreover, the layer where formation ends varies widely across inputs. Motivated by these findings, we propose Targeted Unlearning at Layers Identified Per-input (TULIP). For each input, TULIP uses the logit lens to locate the formation-readout boundary and removes the hidden state's alignment with the forget answer's unembedding vector there. TULIP consistently outperforms output- and representation-level baselines on TOFU, PISTOL, and WMDP across Llama, Qwen, and Zephyr models. It also remains robust to paraphrase and quantization attacks. Beyond standalone use, its per-input layer selection serves as a plug-and-play component that further improves existing methods.

Subset selection-based methods are widely used to explain deep vision models: they attribute predictions by highlighting the most influential image regions and support object-level explanations. While these methods perform well in in-distribution (ID) settings, their behavior under out-of-distribution (OOD) conditions remains poorly understood. Through extensive experiments across multiple ID-OOD sets, we find that reliability of the existing subset based methods degrades markedly, yielding redundant, unstable, and uncertainty-sensitive explanations. To address these shortcomings, we introduce a framework that combines submodular subset selection with layer-wise, gradient-based uncertainty estimation to improve robustness and fidelity without requiring additional training or auxiliary models. Our approach estimates uncertainty via adaptive weight perturbations and uses these estimates to guide submodular optimization, ensuring diverse and informative subset selection. Empirical evaluations show that, beyond mitigating the weaknesses of existing methods under OOD scenarios, our framework also yields improvements in ID settings. These findings highlight limitations of current subset-based approaches and demonstrate how uncertainty-driven optimization can enhance attribution and object-level interpretability, paving the way for more transparent and trustworthy AI in real-world vision applications.

Large language models (LLMs) have shown remarkable capabilities in language understanding and generation. However, such impressive capability typically comes with a substantial model size, which presents significant challenges in deployment and inference. While structured pruning of model parameters offers a promising way to reduce computational costs at deployment time, current methods primarily focus on single model pruning. In this work, we develop a novel strategy to compress models by strategically combining or merging layers from finetuned model variants, which preserves the original model's abilities by aggregating capabilities accentuated in different finetunes. We pose the optimal tailoring of these LLMs as a zero-order optimization problem, adopting a search space that supports three different operations: (1) Layer removal, (2) Layer selection from different candidate models, and (3) Layer merging. Our experiments demonstrate that this approach leads to competitive model pruning, for example, for the Llama2-13B model families, our compressed models maintain approximately 97.3\% of the original performance while removing sim25% of parameters, significantly outperforming previous state-of-the-art methods. The code is available at https://github.com/Guinan-Su/auto-merge-llm.

Activation steering has become a popular training-free method to control LLM behavior by injecting precomputed direction vectors into the model's residual stream at inference time. Yet its robustness to realistic input variation remains unstudied. We present the first systematic evaluation of activation steering robustness under adversarial text perturbations on the inputs, covering four extraction methods, three attack strategies, six personas from Anthropic Model-Written Evaluation Dataset, and five models ranging from 1.5B to 30B parameters. Attacks succeed broadly across all settings: directional robustness drops by up to 64%, post-attack confidence collapses near or below 0.25 across all methods and models, and steering strength degrades on nearly every steerable input. Layer selection is equally fragile, with the optimal layer identified by an automated method on clean inputs shifting by up to 17 positions under perturbation, a failure that compounds the vector-level breakdown. Extracting vectors from adversarially perturbed inputs partially recovers steerability for PCA and MD on mid-to-large models, but they consistently fail to locate the improved optimal layer, limiting the practical benefit of this mitigation. Together, these findings reveal that the brittleness of activation steering is structural rather than method-specific, and that current layer selection strategies are not robust enough for real-world deployment.

Hybrid attention models improve long-context efficiency by retaining only a subset of full-attention layers and replacing the remaining layers with linear attention. However, the effectiveness of Transformer-to-hybrid conversion critically depends on which layers preserve full attention. Existing hybrid layer selection methods typically rely on heuristic strategies such as fixed placement patterns or layerwise scoring, implicitly treating layer importance as isolated and overlooking the interdependent layer effect under a global hybrid configuration. In this work, we formulate hybrid layer selection as a budget-constrained subset optimization problem. We further propose FlashMorph (Fast LAyer Selection for Hybrid MORPHing), an effective, efficient and scalable layer selection method for Transformer-to-hybrid conversion. FlashMorph first constructs a morphable model by equipping each full-attention layer with a converted linear-attention branch. It then freezes all model weights and jointly optimizes layerwise gates on synthetic long-context retrieval data, with a linearization regularization that encourages the model to rely on linear attention for efficiency. The learned gates are discretized under a preset full-attention budget to instantiate the hybrid architecture, followed by standard logits distillation and long-context finetuning. Extensive experiments show that FlashMorph discovers more effective hybrid configurations, preserves strong long-context recall and general benchmark performance while substantially reducing layer selection cost compared with existing layer selection methods, demonstrating its effectiveness, efficiency, and scalability.

The evolution of large language models (LLMs) towards applications with ultra-long contexts faces challenges posed by the high computational and memory costs of the Transformer architecture. While existing sparse and linear attention mechanisms attempt to mitigate these issues, they typically involve a trade-off between memory efficiency and model performance. This paper introduces MiniCPM-SALA, a 9B-parameter hybrid architecture that integrates the high-fidelity long-context modeling of sparse attention (InfLLM-V2) with the global efficiency of linear attention (Lightning Attention). By employing a layer selection algorithm to integrate these mechanisms in a 1:3 ratio and utilizing a hybrid positional encoding (HyPE), the model maintains efficiency and performance for long-context tasks. Furthermore, we introduce a cost-effective continual training framework that transforms pre-trained Transformer-based models into hybrid models, which reduces training costs by approximately 75% compared to training from scratch. Extensive experiments show that MiniCPM-SALA maintains general capabilities comparable to full-attention models while offering improved efficiency. On a single NVIDIA A6000D GPU, the model achieves up to 3.5x the inference speed of the full-attention model at the sequence length of 256K tokens and supports context lengths of up to 1M tokens, a scale where traditional full-attention 8B models fail because of memory constraints.

Sparse Autoencoders (SAEs) provide potentials for uncovering structured, human-interpretable representations in Large Language Models (LLMs), making them a crucial tool for transparent and controllable AI systems. We systematically analyze SAE for interpretable feature extraction from LLMs in safety-critical classification tasks. Our framework evaluates (1) model-layer selection and scaling properties, (2) SAE architectural configurations, including width and pooling strategies, and (3) the effect of binarizing continuous SAE activations. SAE-derived features achieve macro F1 > 0.8, outperforming hidden-state and BoW baselines while demonstrating cross-model transfer from Gemma 2 2B to 9B-IT models. These features generalize in a zero-shot manner to cross-lingual toxicity detection and visual classification tasks. Our analysis highlights the significant impact of pooling strategies and binarization thresholds, showing that binarization offers an efficient alternative to traditional feature selection while maintaining or improving performance. These findings establish new best practices for SAE-based interpretability and enable scalable, transparent deployment of LLMs in real-world applications. Full repo: https://github.com/shan23chen/MOSAIC.

Fine-tuning Large Language Models (LLMs) remains structurally uncertain despite parameter-efficient methods such as Low-Rank Adaptation (LoRA), as the layer-specific roles of internal representations are poorly understood, leading to heuristic decisions about where adaptation should be applied. We model the evolution of hidden states as a high-dimensional geometric trajectory and propose using the Ramer-Douglas-Peucker (RDP) algorithm, a parameter-free and training-free polygon simplification method that preserves global structural transitions while eliminating locally redundant changes, to identify critical breakpoints along the representation path. Crucially, we use these geometric pivots not merely for analysis, but as a direct decision signal for determining which layers should be adapted during parameter-efficient fine-tuning. By integrating this geometry-aware layer selection strategy into LoRA fine-tuning of Qwen3-8B-Base, we achieve superior performance on MMLU-Math using only 13 RDP-selected layers (81.67%), significantly outperforming both full 36-layer adaptation (79.32%) and random 13-layer selection (75.56%), as well as the baseline Qwen3-8B-Base model (74.25%). These results demonstrate that leveraging the intrinsic geometry of representation trajectories provides a robust, interpretable, and training-free signal for optimizing layer selection during model adaptation.

Vision foundation models (VFMs) have achieved strong performance across various vision tasks. However, it still remains challenging to apply VFMs for cross-domain few-shot segmentation (CD-FSS), which segments objects of novel classes under domain shifts using only a few labeled exemplars. The challenge is mainly driven by two factors: (1) limited labeled exemplars per novel class relative to the scale of VFM pre-training, making the model prone to overfitting during retraining, and (2) target-domain shifts underrepresented during pre-training, inducing cross-domain inconsistency and layer-wise sensitivity. To address these issues, we propose Hierarchical Exemplar Representation Adaptation (HERA), a three-stage select-regularize-calibrate VFM-based segmentation framework that learns effectively from limited labels and adapts to novel domains without source-data retraining. We first design Hierarchical Layer Selection (HLS) to adaptively identify the most informative VFM layer using a data-dependent Exemplar Transfer Risk (ETR) computed for each candidate layer. Then, Prior-Guided Regularization (PGR) regularizes interactions on the selected representation, yielding well-structured local signals for the subsequent stage. Furthermore, Pixelwise Adaptive Calibration (PAC) combines the selected representation with the refined interaction maps to calibrate pixel-wise predictions, producing consistent masks. Together, these stages form a hierarchical select-regularize-calibrate pipeline that guides frozen VFM features in new domains while fine-tuning less than 2.7% of parameters at test time. Extensive experiments show that HERA surpasses the state of the art by more than 4.1 mIoU across multiple CD-FSS benchmarks.

Pretrained visual representations support image generation, but may not fully preserve the fine-grained details needed for faithful reconstruction. Meanwhile, intermediate encoder layers contain complementary visual details, but learning to fuse them for reconstruction can produce a latent distribution that is difficult to model. Existing fusion methods require empirical tuning of layer selection or staged optimization of fusion and decoding, increasing configuration effort or training complexity. We introduce HiRAE (Hierarchical Representation Autoencoder), which learns a hierarchical fusion framework over the full encoder hierarchy to improve reconstruction fidelity while maintaining compatibility with generative modeling. HiRAE groups encoder layers by depth and learns residual corrections to the deepest representation. Group-wise norm caps bound these corrections relative to the deep anchor, with tighter budgets for shallower groups. Our HiRAE-24 preserves the latent token count and channel dimension. On ImageNet-256, HiRAE-24 reduces reconstruction FID from 0.299 to 0.209 relative to RAEv2 while maintaining competitive guided generation quality. For text-to-image generation, HiRAE-24 improves alignment over RAEv2 on GenEval, DPG-Bench, and GenAI-Bench both before and after supervised fine-tuning. Under the same generator-training and evaluation protocol, post-fine-tuning GenEval increases from 84.86 to 87.70.

The success of bidirectional encoders using masked language models, such as BERT, on numerous natural language processing tasks has prompted researchers to attempt to incorporate these pre-trained models into neural machine translation (NMT) systems. However, proposed methods for incorporating pre-trained models are non-trivial and mainly focus on BERT, which lacks a comparison of the impact that other pre-trained models may have on translation performance. In this paper, we demonstrate that simply using the output (contextualized embeddings) of a tailored and suitable bilingual pre-trained language model (dubbed BiBERT) as the input of the NMT encoder achieves state-of-the-art translation performance. Moreover, we also propose a stochastic layer selection approach and a concept of dual-directional translation model to ensure the sufficient utilization of contextualized embeddings. In the case of without using back translation, our best models achieve BLEU scores of 30.45 for En->De and 38.61 for De->En on the IWSLT'14 dataset, and 31.26 for En->De and 34.94 for De->En on the WMT'14 dataset, which exceeds all published numbers.

Large Language Models (LLMs) are driving advancements in artificial intelligence by increasing the scale of model parameters, which has significantly enhanced generalization ability and unlocked new capabilities in practice. However, their performance in specific downstream tasks is usually hindered by their knowledge boundaries on these tasks. Thus, fine-tuning techniques, especially the widely used Low-Rank Adaptation (LoRA) method, have been introduced to expand the boundaries on these tasks, whereas LoRA would underperform on certain tasks owing to its potential overfitting on these tasks. To overcome this overfitting and improve the performance of LoRA, we propose the flexible low rank adaptation (Flexora) method to automatically and flexibly select the most important layers needing to be fine-tuned to achieve the best performance on different downstream tasks. Specifically, Flexora firstly frames this layer selection problem as a well-defined hyperparameter optimization (HPO) problem, then addresses it using the unrolled differentiation (UD) method, and finally selects the most useful layers based on the optimized hyperparameters. Our extensive experiments on many pretrained models and natural language tasks show that Flexora is able to consistently improve over the existing baselines, indicating the effectiveness of our Flexora in practice. We additionally provide insightful theoretical results and many ablation studies to deliver a comprehensive understanding of our Flexora.

Auto-regressive Large Language Models (LLMs) demonstrate remarkable performance across different domains such as vision and language processing. However, due to sequential processing through a stack of transformer layers, autoregressive decoding faces significant computation/latency challenges, particularly in resource-constrained environments like mobile and edge devices. Existing approaches in literature that aim to improve latency via skipping layers have two distinct flavors - 1) Early exit, and 2) Input-agnostic heuristics where tokens exit at pre-determined layers irrespective of input sequence. Both the above strategies have limitations - the former cannot be applied to handle KV Caching necessary for speed-ups in modern framework and the latter does not capture the variation in layer importance across tasks or more generally, across input sequences. To address both limitations, we propose FiRST, an algorithm that reduces inference latency by using layer-specific routers to select a subset of transformer layers adaptively for each input sequence - the prompt (during the prefill stage) decides which layers will be skipped during decoding. FiRST preserves compatibility with KV caching enabling faster inference while being quality-aware. FiRST is model-agnostic and can be easily enabled on any pre-trained LLM. Our approach reveals that input adaptivity is critical - indeed, different task-specific middle layers play a crucial role in evolving hidden representations depending on tasks. Extensive experiments show that FiRST significantly reduces latency while outperforming other layer selection strategies in quality metics. It retains competitive performance to base model (without layer skipping) and in some cases, even improves upon it. FiRST is thus a promising and efficient solution for LLM deployment in low-resource environments.

Large language models hallucinate most about entities they have never seen. We ask whether a model's activations betray entity familiarity before a single answer token is generated, and whether that signal predicts the factual reliability of the answers. On four Polish Bielik models (1.5B-11B parameters), we probe four entity domains (athletes, cities, writers, musicians), each with 42 well-known, 42 obscure-but-real, and 42 fabricated entities addressed by a one-sentence question (504 prompts per model). Two unsupervised, single-forward-pass dispersion measures over post-SwiGLU MLP activations, inverse participation ratio and spectral entropy, separate known from fabricated entities at AUROC 0.95-1.00 across all domains and scales; a supervised linear probe reaches 0.99-1.00. Both clear selection-aware permutation floors of about 0.70-0.74 (empirical p<=1e-3), survive held-out layer selection (0.93-0.99), and persist on real names (known vs. obscure-but-real: 0.96-1.00). The signal transfers across entity types (mean off-diagonal AUROC 0.92-0.99); a matched-template counterfactual shows the only large drops are template-caused, not entity-type effects, and the signal is diffuse across heads. This representational signal is already at ceiling at 1.5B, whereas behavioral factual reliability scales sharply: 0, 2, 10, and 19 of 42 known athletes are answered fully correctly by the 1.5B, 4.5B, 7B, and 11B models under a strict judge. Within known entities, separating correct from hallucinated answers is much harder (probe 0.93; dispersion no better than a first-token-entropy baseline). A five-sample semantic-entropy baseline reaches only 0.71-0.83 at 5x the inference cost. Despite this internal awareness, the models almost never abstain: an audit of 2,520 answers finds 2 refusals and 1 hedge. Entity familiarity and factual reliability are distinct phenomena on different scaling curves.

Explainable AI (XAI) in creative practice can be less about technocentric explanation and more about enabling artists to inspect modify and debug models as part of making Yet largescale texttoimage diffusion systems are typically presented as opaque endtoend tools limiting this kind of material engagement We argue that even large models can function as creative materials when their internal structure is made visible and manipulable To support this we propose a handson approach to explainability centred on experimentation and intervention We instantiate this approach with a model bending and an interactive (inspection) interface integrated into ComfyUIs nodebased workflow including interactive layer selection and intervention controls Through qualitative and quantitative analysis of bending interventions in Stable Diffusion 15 we show how manipulating specific components of a diffusion pipeline produces relatively consistent families of visual effects allowing artists to build practical layerlevel intuition about how different parts of the model shape generated images

We generalize deep self-attention distillation in MiniLM (Wang et al., 2020) by only using self-attention relation distillation for task-agnostic compression of pretrained Transformers. In particular, we define multi-head self-attention relations as scaled dot-product between the pairs of query, key, and value vectors within each self-attention module. Then we employ the above relational knowledge to train the student model. Besides its simplicity and unified principle, more favorably, there is no restriction in terms of the number of student's attention heads, while most previous work has to guarantee the same head number between teacher and student. Moreover, the fine-grained self-attention relations tend to fully exploit the interaction knowledge learned by Transformer. In addition, we thoroughly examine the layer selection strategy for teacher models, rather than just relying on the last layer as in MiniLM. We conduct extensive experiments on compressing both monolingual and multilingual pretrained models. Experimental results demonstrate that our models distilled from base-size and large-size teachers (BERT, RoBERTa and XLM-R) outperform the state-of-the-art.

Deep neural networks (DNNs) are powerful machine learning models and have succeeded in various artificial intelligence tasks. Although various architectures and modules for the DNNs have been proposed, selecting and designing the appropriate network structure for a target problem is a challenging task. In this paper, we propose a method to simultaneously optimize the network structure and weight parameters during neural network training. We consider a probability distribution that generates network structures, and optimize the parameters of the distribution instead of directly optimizing the network structure. The proposed method can apply to the various network structure optimization problems under the same framework. We apply the proposed method to several structure optimization problems such as selection of layers, selection of unit types, and selection of connections using the MNIST, CIFAR-10, and CIFAR-100 datasets. The experimental results show that the proposed method can find the appropriate and competitive network structures.

Video diffusion models (DMs) have enabled high-quality video synthesis. However, their computation costs scale quadratically with sequence length because self-attention has quadratic complexity. While linear attention lowers the cost, fully replacing quadratic attention requires expensive pretraining due to the limited expressiveness of linear attention and the complexity of spatiotemporal modeling in video generation. In this paper, we present LinVideo, an efficient data-free post-training framework that replaces a target number of self-attention modules with linear attention while preserving the original model's performance. First, we observe a significant disparity in the replaceability of different layers. Instead of manual or heuristic choices, we frame layer selection as a binary classification problem and propose selective transfer, which automatically and progressively converts layers to linear attention with minimal performance impact. Additionally, to overcome the ineffectiveness and inefficiency of existing objectives for this transfer process, we introduce an anytime distribution matching (ADM) objective that aligns the distributions of samples across any timestep along the sampling trajectory. This objective is efficient and recovers model performance. Extensive experiments show that our method achieves a 1.25-2.00x speedup while preserving generation quality, and our 4-step distilled model further delivers a 15.92x latency reduction with minimal visual quality drop.

We present Gabliteration, a novel neural weight modification technique that advances beyond traditional abliteration methods by implementing adaptive multi-directional projections with regularized layer selection. Our approach addresses the fundamental limitation of existing methods that compromise model quality while attempting to modify specific behavioral patterns. Through dynamic layer optimization, regularized projection matrices, and adaptive scaling mechanisms, we achieve theoretically superior weight modification while minimizing quality degradation in unrelated domains. We validate our method through the gabliterated-v1 model series (0.6B to 4B parameters) available on Hugging Face, demonstrating practical applicability across multiple model scales.

Large language models (LLMs) are increasingly deployed in domains requiring guardrails to detect unsafe, off-topic, or adversarial prompts. Existing guardrails predominantly rely on fine-tuning to build classifiers, which often suffer from low generalization and high inference latency. We present kNNGuard, a training-free guardrail that utilizes the activation space of an off-the-shelf LLM. Given a small bank of 50 safe and unsafe prompts, kNNGuard extracts hidden activations and performs multi-layer kNN fusing activation-space and embedding-space scores for classification. Across six domains spanning topical and security prompts, kNNGuard achieves competitive or superior F1 compared to fine-tuned state-of-the-art guardrails while running 2.7x faster than the best comparable guardrail, and 10x faster than a fine-tuned safety classifier without gradient updates or fine-tuning. Domain adaptation requires only updating the labeled bank, which can be constructed in under 10 seconds and several orders of magnitude faster than established guardrails. We also analyze the impact of system prompts, layer selection, and integration into production LLM pipelines as a configurable, low-latency guardrail.

Deploying large language models in user-facing systems requires efficient output safety filtering. Existing approaches typically rely on a separate moderation model applied after generation, which doubles inference cost and only detects violations after generation completes. We observe that the signal needed for moderation is already present in the model hidden states. Based on this, we train lightweight token-level probes that operate directly on internal activations, producing per-token safety scores that can be aggregated for both offline evaluation and online intervention. The probe reuses activations from the generator and requires no additional forward pass, enabling sub millisecond per-token safety checks inside the decoding loop. A probe applied to a single mid layer recovers most decisions of a strong guard model, acting as a low cost surrogate optimized for latency rather than accuracy. In streaming settings, it can halt or modify unsafe outputs before they are fully generated, replacing end of sequence moderation with continuous token level monitoring. Compared to post hoc and streaming guard models, our method achieves orders of magnitude lower compute overhead with minimal latency cost. We also provide a practical deployment recipe, including layer selection, aggregation strategy, probing frequency, and triggering thresholds. Finally, we show that the probe linear component corresponds to a direction in residual space, enabling both detection and activation steering at negligible cost.

For a very long time, unsupervised learning for anomaly detection has been at the heart of image processing research and a stepping stone for high performance industrial automation process. With the emergence of CNN, several methods have been proposed such as Autoencoders, GAN, deep feature extraction, etc. In this paper, we propose a new method based on the promising concept of knowledge distillation which consists of training a network (the student) on normal samples while considering the output of a larger pretrained network (the teacher). The main contributions of this paper are twofold: First, a reduced student architecture with optimal layer selection is proposed, then a new Student-Teacher architecture with network bias reduction combining two teachers is proposed in order to jointly enhance the performance of anomaly detection and its localization accuracy. The proposed texture anomaly detector has an outstanding capability to detect defects in any texture and a fast inference time compared to the SOTA methods.

Training-free video object editing aims to achieve precise object-level manipulation, including object insertion, swapping, and deletion. However, it faces significant challenges in maintaining fidelity and temporal consistency. Existing methods, often designed for U-Net architectures, suffer from two primary limitations: inaccurate inversion due to first-order solvers, and contextual conflicts caused by crude "hard" feature replacement. These issues are more challenging in Diffusion Transformers (DiTs), where the unsuitability of prior layer-selection heuristics makes effective guidance challenging. To address these limitations, we introduce ContextFlow, a novel training-free framework for DiT-based video object editing. In detail, we first employ a high-order Rectified Flow solver to establish a robust editing foundation. The core of our framework is Adaptive Context Enrichment (for specifying what to edit), a mechanism that addresses contextual conflicts. Instead of replacing features, it enriches the self-attention context by concatenating Key-Value pairs from parallel reconstruction and editing paths, empowering the model to dynamically fuse information. Additionally, to determine where to apply this enrichment (for specifying where to edit), we propose a systematic, data-driven analysis to identify task-specific vital layers. Based on a novel Guidance Responsiveness Metric, our method pinpoints the most influential DiT blocks for different tasks (e.g., insertion, swapping), enabling targeted and highly effective guidance. Extensive experiments show that ContextFlow significantly outperforms existing training-free methods and even surpasses several state-of-the-art training-based approaches, delivering temporally coherent, high-fidelity results.

While LLMs are powerful embedding backbones, their application in training-free settings faces two structural challenges: causal attention restricts early tokens from accessing subsequent context, and the next-token prediction objective biases representations toward generation rather than semantic compression. To address these limitations, we propose KV-Embedding, a framework that activates the latent representation power of frozen LLMs. Our method leverages the observation that the key-value (KV) states of the final token at each layer encode a compressed view of the sequence. By re-routing these states as a prepended prefix, we enable all tokens to access sequence-level context within a single forward pass. To ensure model-agnostic applicability, we introduce an automated layer selection strategy based on intrinsic dimensionality. Evaluations on MTEB across Qwen, Mistral, and Llama backbones show that KV-Embedding outperforms existing training-free baselines by up to 10%, while maintaining robust performance on sequences up to 4,096 tokens. These results demonstrate that internal state manipulation offers an efficient alternative to input modification, and we hope this work encourages further exploration of LLM internals for representation learning.

Recent work by Anthropic on Mechanistic interpretability claims to understand and control Large Language Models by extracting human-interpretable features from their neural activation patterns using sparse autoencoders (SAEs). If successful, this approach offers one of the most promising routes for human oversight in AI safety. We conduct an initial stress-test of these claims by replicating their main results with open-source SAEs for Llama 3.1. While we successfully reproduce basic feature extraction and steering capabilities, our investigation suggests that major caution is warranted regarding the generalizability of these claims. We find that feature steering exhibits substantial fragility, with sensitivity to layer selection, steering magnitude, and context. We observe non-standard activation behavior and demonstrate the difficulty to distinguish thematically similar features from one another. While SAE-based interpretability produces compelling demonstrations in selected cases, current methods often fall short of the systematic reliability required for safety-critical applications. This suggests a necessary shift in focus from prioritizing interpretability of internal representations toward reliable prediction and control of model output. Our work contributes to a more nuanced understanding of what mechanistic interpretability has achieved and highlights fundamental challenges for AI safety that remain unresolved.

In regulated domains such as banking and healthcare, where privacy constraints make real speech costly to collect and retain, synthetic speech from modern text-to-speech (TTS) is an appealing alternative for training automatic speech recognition (ASR) without exposing sensitive customer recordings. Yet a persistent distributional gap between synthetic and real data limits how far it can replace genuine recordings. Prior work largely treats this gap as a black box to be engineered around, but in our work, we instead examine its origin directly by probing a SLAM-ASR architecture. Then, we localise where its LLM backbone separates real from synthetic speech and find the discriminative signal concentrated in the early-to-middle layers, where temporal and prosodic perturbations disrupt it most. We further show that representation-level separability, help, but does not directly predict downstream ASR gains. On the other hand, convolving synthetic audio with room impulse responses (RIRs) narrows the gap not by making synthetic speech sound cleaner or more natural, but by reproducing the acoustic irregularities of real recordings. Translating these findings into the training procedure, by adding a layer-selection module combined with RIR augmentation matches a fully real-data baseline using only 25% of the real speech (13.6h) and surpasses it at all higher proportions.

Training large foundation models from scratch for domain-specific applications is almost impossible due to data limits and long-tailed distributions -- taking remote sensing (RS) as an example. Fine-tuning natural image pre-trained models on RS images is a straightforward solution. To reduce computational costs and improve performance on tail classes, existing methods apply parameter-efficient fine-tuning (PEFT) techniques, such as LoRA and AdaptFormer. However, we observe that fixed hyperparameters -- such as intra-layer positions, layer depth, and scaling factors, can considerably hinder PEFT performance, as fine-tuning on RS images proves highly sensitive to these settings. To address this, we propose MetaPEFT, a method incorporating adaptive scalers that dynamically adjust module influence during fine-tuning. MetaPEFT dynamically adjusts three key factors of PEFT on RS images: module insertion, layer selection, and module-wise learning rates, which collectively control the influence of PEFT modules across the network. We conduct extensive experiments on three transfer-learning scenarios and five datasets in both RS and natural image domains. The results show that MetaPEFT achieves state-of-the-art performance in cross-spectral adaptation, requiring only a small amount of trainable parameters and improving tail-class accuracy significantly.

Decoder hidden states from different layers of large language models (LLMs) often encode complementary information. However, existing speculative decoding methods typically rely on a small set of target-model layers chosen using fixed, position-based heuristics. Selecting an optimal subset of layers is inherently a combinatorial problem, making exhaustive evaluation infeasible even for moderately deep models. In this work, we present a principled framework for multi-layer hidden-state selection for speculative decoding based on two complementary criteria: informativeness, measured through matrix-entropy analysis, and diversity, quantified using centered kernel alignment (CKA). We investigate layer-wise Shannon entropy, aggregate entropy under hidden-state concatenation, and pairwise CKA dynamics across depth, revealing distinct geometric and informational compartments within decoder representations. Motivated by these findings, we propose entropy and CKA-based layer selection algorithms that favor hidden-state sets that are both highly informative and minimally redundant. As part of this framework, we introduce token-entropy filtering, which removes hidden states associated with low predictive-entropy tokens, thereby improving the quality of layer-selection statistics. In EAGLE3-style speculative decoding, our selected sets outperform fixed baseline choices, including the default [2, N//2, N-3] rule, while providing a clearer explanation of why some defaults can remain competitive. Our results provide a practical recipe for multi-layer hidden-state selection for speculative decoding, insights into the geometry and information in LLM decoder states, and a foundation for extending similar analysis to related applications.

Safety in Multimodal Large Language Models (MLLMs) depends on unsafe multimodal data for post-training alignment or activation steering. However, such data is hard to collect, must be gathered anew for each modality, and its collection and distribution raise ethical and legal concerns. In this work, we relax this constraint and investigate whether textual refusal directions, extracted directly from the LLM backbone, generalize across modalities (i.e., image, video). Preliminary findings confirm this ability, though effectiveness is conditioned by layer selection, steering strength, and cross-modal alignment, with the latter causing safe multimodal inputs to be spuriously steered toward refusal. Building on this, we introduce Modality-Agnostic Refusal Steering (MARS), a lightweight training-free approach that injects multimodal safety without the need for multimodal safety data. MARS corrects modality misalignment via activation centering, adaptively scales steering strength within a geometrically defined trust region, and selects the optimal intervention layer, operating at the first generated token. Evaluated on five SOTA MLLMs across safety, utility, and video jailbreak, MARS achieves consistent safety gains while preserving utility up to over-refusal. MARS reveals that safety-relevant structure is shared across modalities and that textual refusal directions are a powerful and underexplored foundation for multimodal alignment.

We show that a language model's ability to predict text is tightly linked to the breadth of its embedding space: models that spread their contextual representations more widely tend to achieve lower perplexity. Concretely, we find that representation dispersion--the average pairwise cosine distance among hidden vectors--strongly and negatively correlates with perplexity across diverse model families (LLaMA, Qwen, and others) and domains (Wikipedia, news, scientific abstracts). Beyond illustrating this link, we show how dispersion can be leveraged for a range of practical tasks--without requiring labeled data. First, measuring dispersion on unlabeled text allows us to rank examples by difficulty and identify hard slices in new domains, offering a data-efficient tool for screening and prioritizing models before full evaluation. Next, we find that identifying layers with higher dispersion pinpoints the best representations for retrieval-based methods such as kNN-LM, bypassing exhaustive layer-by-layer searches. Finally, we integrate a simple "push-away" objective into training, which increases dispersion in both single-domain and cross-domain scenarios and directly improves perplexity in each. Code is available at https://github.com/yanhong-lbh/rep_dispersion.

We present UGround, a Unified visual Grounding paradigm that dynamically selects intermediate layers across Unrolled transformers as ``mask as prompt'', diverging from the prevailing pipeline that leverages the fixed last hidden layer as ``<SEG> as prompt''. UGround addresses two primary challenges posed by the prevailing paradigm: (1) its reliance on the fixed last hidden layer, which sequentially amplifies cumulative errors arising from layer-by-layer propagation without intermediate correction, and (2) its use of <SEG> as a prompt, which implicitly projects textual embeddings into visual space without explicit spatial cues (\eg, coordinates). Central to UGround is Policy-Prompted Masking, which comprises two key components: Stochastic Skip Connection (SSC) and Mask as Prompt (MasP). SSC is a reinforcement learning policy that, via stochastic sampling, allows each <SEG> token to slide across unrolled transformer layers, enabling dynamic layer selection at which it connects to the vision model (\eg, SAM) in a skip-connection fashion. Given the selected hidden layer, MasP uses the similarity map derived from the <SEG> token and image tokens as a soft logit mask to prompt SAM for mask generation, offering explicit spatial cues through its activation regions. To validate the effectiveness of UGround, we, for the first time, have unified visual grounding within a single framework from an attribute perspective, spanning from traditional refer expression segmentation to newly proposed reasoning segmentation, single-target to multi-target, positive query to false premise (empty target). All codes and models are publicly available at https://github.com/rui-qian/UGround{https://github.com/rui-qian/UGround}.

Steering vectors work for some concepts and layers but fail for others, and practitioners have no way to predict which setting applies before running an intervention. We introduce the Linear Accessibility Profile (LAP), a per-layer diagnostic that repurposes the logit lens as a predictor of steering vector effectiveness. The key measure, A_{lin}, applies the model's unembedding matrix to intermediate hidden states, requiring no training. Across 24 controlled binary concept families on five models (Pythia-2.8B to Llama-8B), peak A_{lin} predicts steering effectiveness at ρ= +0.86 to +0.91 and layer selection at ρ= +0.63 to +0.92. A three-regime framework explains when difference-of-means steering works, when nonlinear methods are needed, and when no method can work. An entity-steering demo confirms the prediction end-to-end: steering at the LAP-recommended layer redirects completions on Gemma-2-2B and OLMo-2-1B-Instruct, while the middle layer (the standard heuristic) has no effect on either model.

We study optimal learning-rate selection in two-layer and three-layer linear neural networks trained to learn linear target functions. In particular, we derive the exact closed-form expressions for the gradients and test loss after one and two steps of gradient descent, enabling a precise characterization of early training dynamics. We characterize how learning rates should scale under the gradient approximation in the first two steps, and prove that performing updates with this approximation yields a tractable surrogate loss with a tight, small approximation error. This formulation enables the theoretical analysis of layer-wise learning rates and reveals a distinct early-training regime: test loss can be minimized by unequal learning rates at the initial step, while equal learning rates become optimal in subsequent steps. Our numerical experiments validate the theory and demonstrate the importance of balancing layer-wise learning rates early during training. The code is available at: https://github.com/TDCSZ327/Layer-Balancing.

Recent discoveries on neural network pruning reveal that, with a carefully chosen layerwise sparsity, a simple magnitude-based pruning achieves state-of-the-art tradeoff between sparsity and performance. However, without a clear consensus on "how to choose," the layerwise sparsities are mostly selected algorithm-by-algorithm, often resorting to handcrafted heuristics or an extensive hyperparameter search. To fill this gap, we propose a novel importance score for global pruning, coined layer-adaptive magnitude-based pruning (LAMP) score; the score is a rescaled version of weight magnitude that incorporates the model-level ell_2 distortion incurred by pruning, and does not require any hyperparameter tuning or heavy computation. Under various image classification setups, LAMP consistently outperforms popular existing schemes for layerwise sparsity selection. Furthermore, we observe that LAMP continues to outperform baselines even in weight-rewinding setups, while the connectivity-oriented layerwise sparsity (the strongest baseline overall) performs worse than a simple global magnitude-based pruning in this case. Code: https://github.com/jaeho-lee/layer-adaptive-sparsity

This work introduces Hybrid Sparse Attention (HySparse), a new architecture that interleaves each full attention layer with several sparse attention layers. While conceptually simple, HySparse strategically derives each sparse layer's token selection and KV caches directly from the preceding full attention layer. This architecture resolves two fundamental limitations of prior sparse attention methods. First, conventional approaches typically rely on additional proxies to predict token importance, introducing extra complexity and potentially suboptimal performance. In contrast, HySparse uses the full attention layer as a precise oracle to identify important tokens. Second, existing sparse attention designs often reduce computation without saving KV cache. HySparse enables sparse attention layers to reuse the full attention KV cache, thereby reducing both computation and memory. We evaluate HySparse on both 7B dense and 80B MoE models. Across all settings, HySparse consistently outperforms both full attention and hybrid SWA baselines. Notably, in the 80B MoE model with 49 total layers, only 5 layers employ full attention, yet HySparse achieves substantial performance gains while reducing KV cache storage by nearly 10x.

Large Language Models (LLMs) are increasingly deployed in multi-agent systems, where effective inter-model communication is crucial. Existing communication protocols either rely on natural language, incurring high inference costs and information loss, or on hidden states, which suffer from information concentration bias and inefficiency. To address these limitations, we propose KVComm, a novel communication framework that enables efficient communication between LLMs through selective sharing of KV pairs. KVComm leverages the rich information encoded in the KV pairs while avoiding the pitfalls of hidden states. We introduce a KV layer-wise selection strategy based on attention importance scores with a Gaussian prior to identify the most informative KV pairs for communication. Extensive experiments across diverse tasks and model pairs demonstrate that KVComm achieves comparable performance to the upper-bound method, which directly merges inputs to one model without any communication, while transmitting as few as 30\% of layers' KV pairs. Our study highlights the potential of KV pairs as an effective medium for inter-LLM communication, paving the way for scalable and efficient multi-agent systems.

Vision-Language-Action (VLA) policies are commonly trained from dense robot demonstration trajectories, often collected through teleoperation, by sampling every recorded frame as if it provided equally useful supervision. We argue that this convention creates a temporal supervision imbalance: long low-change segments dominate the training stream, while manipulation-critical transitions such as alignment, contact, grasping, and release appear only sparsely. We introduce FrameSkip, a data-layer frame selection framework that scores trajectory frames using action variation, visual-action coherence, task-progress priors, and gripper-transition preservation, then remaps training samples toward high-importance frames under a target retention ratio. Because FrameSkip operates only in the dataloader, it leaves the VLA architecture, action head, training objective, and inference procedure unchanged. Across RoboCasa-GR1, SimplerEnv, and LIBERO, FrameSkip improves the success-retention trade-off over full-frame training and simpler frame selection variants, achieving a macro-average success rate of 76.15% across the three benchmarks compared with 66.50% for full-frame training while using a compressed trajectory view that retains 20% of unique frames in the main setting.

Context-aware neural machine translation aims to use the document-level context to improve translation quality. However, not all words in the context are helpful. The irrelevant or trivial words may bring some noise and distract the model from learning the relationship between the current sentence and the auxiliary context. To mitigate this problem, we propose a novel end-to-end encoder-decoder model with a layer-wise selection mechanism to sift and refine the long document context. To verify the effectiveness of our method, extensive experiments and extra quantitative analysis are conducted on four document-level machine translation benchmarks. The experimental results demonstrate that our model significantly outperforms previous models on all datasets via the soft selection mechanism.

This paper introduces OSC (Orchestrating Cognitive Synergy), a knowledge-aware adaptive collaboration framework designed to enhance cognitive synergy in multi-agent systems with large language models. While prior work has advanced agent selection and result aggregation, efficient linguistic interactions for deep collaboration among expert agents remain a critical bottleneck. OSC addresses this gap as a pivotal intermediate layer between selection and aggregation, introducing Collaborator Knowledge Models (CKM) to enable each agent to dynamically perceive its collaborators' cognitive states. Through real-time cognitive gap analysis, agents adaptively adjust communication behaviors, including content focus, detail level, and expression style, using learned strategies. Experiments on complex reasoning and problem-solving benchmarks demonstrate that OSC significantly improves task performance and communication efficiency, transforming "parallel-working individuals'' into a "deeply collaborative cognitive team.'' This framework not only optimizes multi-agent collaboration but also offers new insights into LLM agent interaction behaviors.

In this work, we first explore whether the parameters activated by the MoE layer remain highly sparse at inference. We perform a sparsification study on several representative MoE models. For each expert, we rank parameters by the magnitude of their activations from the gate projection and progressively prune the activated subset. Pruning up to 60% of parameters within that subset causes only negligible task-performance degradation; substantial drops occur only after more than 90% are removed. We further decompose experts into neuron-granular MoE and visualize their activation values, finding that most neuron activations are near zero. This observation motivates us to select only high-activation neuron experts during pretraining. Based on this insight, we propose Mixture of Neuron Experts (MoNE). MoNE achieves neuron-granular expert selection by only applying a simple top-k selection within each expert, incurs negligible latency, and requires no additional routing parameters or inter-expert communication. Extensive experiments demonstrate that MoNE matches traditional MoE performance while activating only 50% of the MoE-layer parameters, and it consistently outperforms traditional MoE when compared at equal numbers of activated parameters. These results suggest that MoNE is a practical approach to improving parameter utilization and inference efficiency in MoE-like models.

Recent works show that reducing the number of layers in a convolutional neural network can enhance efficiency while maintaining the performance of the network. Existing depth compression methods remove redundant non-linear activation functions and merge the consecutive convolution layers into a single layer. However, these methods suffer from a critical drawback; the kernel size of the merged layers becomes larger, significantly undermining the latency reduction gained from reducing the depth of the network. We show that this problem can be addressed by jointly pruning convolution layers and activation functions. To this end, we propose LayerMerge, a novel depth compression method that selects which activation layers and convolution layers to remove, to achieve a desired inference speed-up while minimizing performance loss. Since the corresponding selection problem involves an exponential search space, we formulate a novel surrogate optimization problem and efficiently solve it via dynamic programming. Empirical results demonstrate that our method consistently outperforms existing depth compression and layer pruning methods on various network architectures, both on image classification and generation tasks. We release the code at https://github.com/snu-mllab/LayerMerge.

Despite a century of empirical memory research, existing AI agent memory systems rely on system-engineering metaphors (virtual-memory paging, flat LLM storage, Zettelkasten notes), none integrating principles of consolidation, forgetting, and reconsolidation. We present ZenBrain, a multi-layer memory architecture integrating fifteen neuroscience models. It implements seven memory layers (working, short-term, episodic, semantic, procedural, core, cross-context) orchestrated by nine foundational algorithms (Two-Factor Synaptic Model, vmPFC-coupled FSRS, Simulation-Selection sleep, Bayesian confidence, and five more) plus six new Predictive Memory Architecture (PMA) components: a four-channel NeuromodulatorEngine, prediction-error-gated ReconsolidationEngine, TripleCopyMemory with divergent decay, four-dimensional PriorityMap with amygdala fast-path, StabilityProtector (NogoA/HDAC3 analogue), and MetacognitiveMonitor for bias detection. The 15-algorithm ablation reveals a cooperative survival network: under stress, 9 of 15 algorithms become individually critical (delta-Q up to -93.7%, Wilcoxon, 10 seeds, alpha=0.005). Simulation-Selection sleep achieves 37% stability improvement (p<0.005) with 47.4% storage reduction. TripleCopyMemory retains S(t)=0.912 at 30 days; PriorityMap reaches NDCG@10=0.997. Multi-layer routing beats a flat single-layer baseline by 20.7% F1 on LoCoMo (p<0.005) and 19.5% on MemoryArena (p=0.015). On LongMemEval-500, ZenBrain holds the highest mean rank on all 12 system-judge cells (4 systems x 3 LLM judges), three-judge mean J=0.545 vs letta=0.485, a-mem=0.414, mem0=0.394; all 9 pair-wise contrasts clear Bonferroni (alpha=0.05/18, min p=6.2e-31, d in [0.18, 0.52]). Under LongMemEval's binary judge, ZenBrain reaches 91.3% of oracle accuracy at 1/106th the per-query token budget. Open-source with 11,589 automated test cases.

Omni-modal large language models (om-LLMs) achieve unified audio-visual understanding by encoding video and audio into temporally aligned token sequences interleaved at the window level. However, processing these dense non-textual tokens throughout the LLM incurs substantial computational overhead. Although training-free token selection can reduce this cost, existing methods either focus on visual-only inputs or prune om-LLM tokens only before the LLM with fixed per-modality ratios, failing to capture how cross-modal token importance evolves across layers. To address this limitation, we first analyze the layer-wise token dependency of om-LLMs. We find that visual and audio dependencies follow a block-wise pattern and gradually weaken with depth, indicating that many late-layer non-textual tokens become redundant after cross-modal fusion. Motivated by this observation, we propose SEATS, a training-free, stage-adaptive token selection method for efficient om-LLM inference. Before the LLM, SEATS removes spatiotemporal redundancy via attention-weighted diversity selection. Inside the LLM, it progressively prunes tokens across blocks and dynamically allocates the retention budget from temporal windows to modalities using query relevance scores. In late layers, it removes all remaining non-textual tokens once cross-modal fusion is complete. Experiments on Qwen2.5-Omni and Qwen3-Omni demonstrate that SEATS effectively improves inference efficiency. Retaining only 10% of visual and audio tokens, it achieves a 9.3x FLOPs reduction and a 4.8x prefill speedup while preserving 96.3% of the original performance.

Long-context inference in decoder-only language models is costly because long prompts are processed during Prefill, cached at every layer, and repeatedly attended to during autoregressive Decode. We introduce Shallow Prefill, dEEp Decode (SPEED), a phase-asymmetric KV-visibility policy that materializes non-anchor prompt-token KV states only in lower layers while keeping Decode-phase tokens full-depth. Unlike previous approaches that make upper-layer prompt KV states cheaper to store or construct, SPEED removes prefill tokens from the upper-layer Decode visibility set altogether. With a minimal BoS anchor, this simple change preserves broad benchmark quality while reducing long-context cost. In a controlled Llama-3.1-8B instruction-tuning study, SPEED using only 75\% of layers for prefill tokens reaches 51.2 average score on OLMES-style benchmarks, compared with 51.4 for the full-depth baseline, while improving TTFT by 33\%, TPOT by 22\%, and reducing active KV memory by 25.0\% at 128K context. Layer-wise diagnostics suggest that this cutoff retains the main prompt-selection and representation-stabilization regions of the full-depth model. These results show that long-context prompt tokens need not always persist as full-depth KV-cache objects when Decode-phase tokens remain full-depth.

Vision Foundation Models (VFMs) with Vision Transformer (ViT) backbones, such as DINOv2, have become essential for downstream tasks like object recognition and semantic segmentation. The immense computational requirements of backbones often necessitate distillation into smaller architectures for edge deployment. Feature-based knowledge distillation (KD) often suffers from the teacher-student gap; the student struggles to imitate teacher's complex feature map due to its limited capacity. To mitigate this bottleneck, we propose LEAP: Layer-skipping Efficiency via Adaptive Progression, a training curriculum for ViT feature-based knowledge distillation. By utilizing the teacher's intermediate feature maps as a sequence of progressively more difficult targets, our curriculum allows the student to build a foundational representation before tackling higher-level abstractions. Our results demonstrate that this paradigm significantly accelerates convergence through adaptive difficulty selection across various student model sizes and dataset scales. With our curriculum, the LEAP-distilled ViT-S achieves 90.1% accuracy on ImageNet-100, a +12.24% improvement compared with baseline. On ImageNet-1K, LEAP achieves +3.84% and +7.75% improvement for the instance retrieval task on the Oxford and Paris datasets, respectively. Furthermore, the curriculum enables 25.1% savings in training FLOPs and 21% savings in training time on ImageNet-100 by implementing early-stopping for teacher inference during the initial stages of training. Code is available at https://github.com/KevinZ0217/LEAP

State-of-the-art rehearsal-free continual learning methods exploit the peculiarities of Vision Transformers to learn task-specific prompts, drastically reducing catastrophic forgetting. However, there is a tradeoff between the number of learned parameters and the performance, making such models computationally expensive. In this work, we aim to reduce this cost while maintaining competitive performance. We achieve this by revisiting and extending a simple transfer learning idea: learning task-specific normalization layers. Specifically, we tune the scale and bias parameters of LayerNorm for each continual learning task, selecting them at inference time based on the similarity between task-specific keys and the output of the pre-trained model. To make the classifier robust to incorrect selection of parameters during inference, we introduce a two-stage training procedure, where we first optimize the task-specific parameters and then train the classifier with the same selection procedure of the inference time. Experiments on ImageNet-R and CIFAR-100 show that our method achieves results that are either superior or on par with {the state of the art} while being computationally cheaper.

As large language models (LLMs) tackle increasingly complex tasks and longer documents, their computational and memory costs during inference become a major bottleneck. To address this, we propose PromptDistill, a novel, training-free method that improves inference efficiency while preserving generation quality. PromptDistill identifies and retains the most informative tokens by leveraging attention interactions in early layers, preserving their hidden states while reducing the computational burden in later layers. This allows the model to focus on essential contextual information without fully processing all tokens. Unlike previous methods such as H2O and SnapKV, which perform compression only after processing the entire input, or GemFilter, which selects a fixed portion of the initial prompt without considering contextual dependencies, PromptDistill dynamically allocates computational resources to the most relevant tokens while maintaining a global awareness of the input. Experiments using our method and baseline approaches with base models such as LLaMA 3.1 8B Instruct, Phi 3.5 Mini Instruct, and Qwen2 7B Instruct on benchmarks including LongBench, InfBench, and Needle in a Haystack demonstrate that PromptDistill significantly improves efficiency while having minimal impact on output quality compared to the original models. With a single-stage selection strategy, PromptDistill effectively balances performance and efficiency, outperforming prior methods like GemFilter, H2O, and SnapKV due to its superior ability to retain essential information. Specifically, compared to GemFilter, PromptDistill achieves an overall 1% to 5% performance improvement while also offering better time efficiency. Additionally, we explore multi-stage selection, which further improves efficiency while maintaining strong generation performance.

Mixture-of-Experts (MoE) layers have emerged as an important tool in scaling up modern neural networks by decoupling total trainable parameters from activated parameters in the forward pass for each token. However, sparse MoEs add complexity to training due to (i) new trainable parameters (router weights) that, like all other parameter groups, require hyperparameter (HP) tuning; (ii) new architecture scale dimensions (number of and size of experts) that must be chosen and potentially taken large. To make HP selection cheap and reliable, we propose a new parameterization for transformer models with MoE layers when scaling model width, depth, number of experts, and expert (hidden) size. Our parameterization is justified by a novel dynamical mean-field theory (DMFT) analysis. When varying different model dimensions trained at a fixed token budget, we find empirically that our parameterization enables reliable HP transfer across models from 51M to over 2B total parameters. We further take HPs identified from sweeping small models on a short token horizon to train larger models on longer horizons and report performant model behaviors.

Synthetic image attribution aims at identifying the generator responsible for a given AI-generated image. Training-free reference-based attribution methods are easily scalable, since newly emerging generators can be incorporated by adding source-specific references rather than retraining a task-specific classifier. Their performance depends on two coupled factors: the representation space used for comparison and the way source-specific references are constructed. However, the interaction between these two factors remains largely unexplored. In this paper, we provide a controlled analysis of this interaction using references and off-the-shelf pretrained representations. We study representations extracted from different layers of CLIP and DINOv2, along with three reference selection methods with varying semantic constraints: arbitrary, semantically aligned, and resynthesis-based references. Our results show that attribution accuracy consistently peaks at intermediate representation levels, indicating that source-discriminative cues are more accessible before strong semantic abstraction dominates. We further show that intermediate representations are not completely semantically neutral, making reference selection critical: semantically constrained references reduce query-reference mismatch and improve attribution, especially under limited reference budgets. Resynthesis is most useful in low-reference regimes, while semantically aligned references provide a better accuracy-cost trade-off when a moderate-sized reference pool is available. Our findings show that training-free reference-based attribution should be understood as the interaction between where images are compared, how the reference set is constructed, and how many references are available.

Automatic Speech Recognition (ASR) has shown remarkable progress, yet it still faces challenges in real-world distant scenarios across various array topologies each with multiple recording devices. The focal point of the CHiME-7 Distant ASR task is to devise a unified system capable of generalizing various array topologies that have multiple recording devices and offering reliable recognition performance in real-world environments. Addressing this task, we introduce an ASR system that demonstrates exceptional performance across various array topologies. First of all, we propose two attention-based automatic channel selection modules to select the most advantageous subset of multi-channel signals from multiple recording devices for each utterance. Furthermore, we introduce inter-channel spatial features to augment the effectiveness of multi-frame cross-channel attention, aiding it in improving the capability of spatial information awareness. Finally, we propose a multi-layer convolution fusion module drawing inspiration from the U-Net architecture to integrate the multi-channel output into a single-channel output. Experimental results on the CHiME-7 corpus with oracle segmentation demonstrate that the improvements introduced in our proposed ASR system lead to a relative reduction of 40.1% in the Macro Diarization Attributed Word Error Rates (DA-WER) when compared to the baseline ASR system on the Eval sets.

In recent years, the long-range attention mechanism of vision transformers has driven significant performance breakthroughs across various computer vision tasks. However, the traditional self-attention mechanism, which processes both informative and non-informative tokens, suffers from inefficiency and inaccuracies. While sparse attention mechanisms have been introduced to mitigate these issues by pruning tokens involved in attention, they often lack context-awareness and intelligence. These mechanisms frequently apply a uniform token selection strategy across different inputs for batch training or optimize efficiency only for the inference stage. To overcome these challenges, we propose a novel algorithm: Select and Pack Attention (SPA). SPA dynamically selects informative tokens using a low-cost gating layer supervised by selection labels and packs these tokens into new batches, enabling a variable number of tokens to be used in parallelized GPU batch training and inference. Extensive experiments across diverse datasets and computer vision tasks demonstrate that SPA delivers superior performance and efficiency, including a 0.6 mAP improvement in object detection and a 16.4% reduction in computational costs.

Production LLM systems often rely on separate models for safety and other classification-heavy steps, increasing latency, VRAM footprint, and operational complexity. We instead reuse computation already paid for by the serving LLM: we train lightweight probes on its hidden states and predict labels in the same forward pass used for generation. We frame classification as representation selection over the full token-layer hidden-state tensor, rather than committing to a fixed token or fixed layer (e.g., first-token logits or final-layer pooling). To implement this, we introduce a two-stage aggregator that (i) summarizes tokens within each layer and (ii) aggregates across layer summaries to form a single representation for classification. We instantiate this template with direct pooling, a 100K-parameter scoring-attention gate, and a downcast multi-head self-attention (MHA) probe with up to 35M trainable parameters. Across safety and sentiment benchmarks our probes improve over logit-only reuse (e.g., MULI) and are competitive with substantially larger task-specific baselines, while preserving near-serving latency and avoiding the VRAM and latency costs of a separate guard-model pipeline.

Supervised fine-tuning (SFT) data selection is commonly formulated as instance ranking: score each example and retain a top-k subset. However, effective SFT training subsets are often produced through ordered curation recipes, where filtering, mixing, and deduplication operators jointly shape the final data distribution. We formulate this problem as fixed-pool data recipe search: given a raw instruction pool and a library of grounded operators, the goal is to discover an executable recipe that constructs a high-quality selected subset under a limited budget of full SFT evaluations, without generating, rewriting, or augmenting training samples. We introduce AutoSelection, a two-layer solver that decouples fixed-pool materialization based on cached task-, data-, and model-side signals from expensive full evaluation, using warmup probes, realized subset states, local recipe edits, Gaussian-process-assisted ranking, and stagnation-triggered reseeding. Experiments on a 90K instruction pool show that AutoSelection achieves the strongest in-distribution reasoning average across three base models, outperforming full-data training, random recipe search, random top-k, and single-operator selectors. Additional Out-of-distribution graph-reasoning results, search-stability analyses, structural ablations, and 1.5B-to-7B transfer checks further show that recipe structure matters beyond individual selection operators. Code is available at https://github.com/w253/AutoSelection.

Long-context inference in modern LLMs is increasingly constrained by decoding efficiency, especially in reasoning-heavy settings where models generate long intermediate chains of thought. Existing sparse attention methods often face a practical efficiency-quality trade-off. Structured block sparse methods typically provide stronger acceleration but incur noticeable quality loss, while token sparse methods are usually more accurate yet deliver limited end-to-end speedup because top-k routing over the full cache remains expensive. In this work, we propose cross-layer sparse attention (CLSA), which is built on top of KV-sharing architectures such as YOCO. The core idea is to share not only the KV cache across cross-decoder layers, but also the routing index. A single indexer computes token-level top-k selection once and reuses the resulting index across layers, thereby preserving the fine-grained selectivity of token sparse attention while amortizing the routing overhead. The resulting architecture improves all major inference bottlenecks jointly, including pre-filling, KV-cache storage, and long-context decoding. Experiments across short-context and long-context benchmarks show that CLSA is both accurate and efficient, achieving up to 7.6x decoding speedup and 17.1x overall throughput improvement at 128K context. These results suggest a more complete architectural solution for long-context LLMs that jointly advances model quality and inference efficiency.

Representation autoencoders (RAEs) reuse features from a pretrained visual encoder as reconstruction and diffusion latents, integrating strong visual representations into image generation. However, RAEs still need to decide which encoder layers form the shared latent space for the generator and pixel decoder. This choice involves a trade-off. Shallower layers tend to preserve fine pixel details better, while deeper layers tend to yield better generation metrics. A fixed heuristic layer fusion therefore couples two stages that benefit from different information. We introduce FuseReg, which replaces heuristic feature selection with training over random subsets of encoder layers. We theoretically analyze the underlying mechanism: subset sampling explicitly penalizes sensitivity to cross-layer disagreement. On ImageNet-256 with DINOv3-L, a single FuseReg decoder reconstructs from full, sparse, and single-layer fusions without retraining, achieving higher PSNR than decoders specialized to fixed fusions. This flexibility also benefits generation: decoder replacement alone reduces unguided gFID by 27% with an unchanged RAEv2 DiT-XL generator. The same regularization principle extends to diffusion training, with joint regularization of both stages reducing unguided gFID by 29% on DiT-Base. These results show that training downstream models for layer-fusion robustness narrows the reconstruction-generation gap without modifying the pretrained encoder.

Activation sparsity can reduce the computational overhead and memory transfers during the forward pass of Large Language Model (LLM) inference. Existing methods face limitations, either demanding time-consuming recovery training that hinders real-world adoption, or relying on empirical magnitude-based pruning, which causes fluctuating sparsity and unstable inference speed-up. This paper introduces LaRoSA (Layerwise Rotated Sparse Activation), a novel method for activation sparsification designed to improve LLM efficiency without requiring additional training or magnitude-based pruning. We leverage layerwise orthogonal rotations to transform input activations into rotated forms that are more suitable for sparsification. By employing a Top-K selection approach within the rotated activations, we achieve consistent model-level sparsity and reliable wall-clock time speed-up. LaRoSA is effective across various sizes and types of LLMs, demonstrating minimal performance degradation and robust inference acceleration. Specifically, for LLaMA2-7B at 40% sparsity, LaRoSA achieves a mere 0.17 perplexity gap with a consistent 1.30x wall-clock time speed-up, and reduces the accuracy gap in zero-shot tasks compared to the dense model to just 0.54%, while surpassing TEAL by 1.77% and CATS by 17.14%.

Mixture-of-Experts (MoE) Large Language Models (LLMs) suffer from severely sub-optimal expert pathways-our study reveals that naive expert selection learned from pretraining leaves a surprising 10-20% accuracy gap for improvement. Motivated by this observation, we develop a novel class of test-time optimization methods to re-weight or "re-mixing" the experts in different layers jointly for each test sample. Since the test sample's ground truth is unknown, we propose to optimize a surrogate objective defined by the sample's "successful neighbors" from a reference set of samples. We introduce three surrogates and algorithms based on mode-finding, kernel regression, and the average loss of similar reference samples/tasks. To reduce the cost of optimizing whole pathways, we apply our algorithms merely to the core experts' mixing weights in critical layers, which enjoy similar performance but save significant computation. This leads to "Critical-Layer, Core-Expert, Collaborative Pathway Optimization (C3PO)". We apply C3PO to two recent MoE LLMs and examine it on six widely-used benchmarks. It consistently improves the base model by 7-15% in accuracy and outperforms widely used test-time learning baselines, e.g., in-context learning and prompt/prefix tuning, by a large margin. Moreover, C3PO enables MoE LLMs with 1-3B active parameters to outperform LLMs of 7-9B parameters, hence improving MoE's advantages on efficiency. Our thorough ablation study further sheds novel insights on achieving test-time improvement on MoE.

Recent guidance methods in diffusion models steer reverse sampling by perturbing the model to construct an implicit weak model and guide generation away from it. Among these approaches, attention perturbation has demonstrated strong empirical performance in unconditional scenarios where classifier-free guidance is not applicable. However, existing attention perturbation methods lack principled approaches for determining where perturbations should be applied, particularly in Diffusion Transformer (DiT) architectures where quality-relevant computations are distributed across layers. In this paper, we investigate the granularity of attention perturbations, ranging from the layer level down to individual attention heads, and discover that specific heads govern distinct visual concepts such as structure, style, and texture quality. Building on this insight, we propose "HeadHunter", a systematic framework for iteratively selecting attention heads that align with user-centric objectives, enabling fine-grained control over generation quality and visual attributes. In addition, we introduce SoftPAG, which linearly interpolates each selected head's attention map toward an identity matrix, providing a continuous knob to tune perturbation strength and suppress artifacts. Our approach not only mitigates the oversmoothing issues of existing layer-level perturbation but also enables targeted manipulation of specific visual styles through compositional head selection. We validate our method on modern large-scale DiT-based text-to-image models including Stable Diffusion 3 and FLUX.1, demonstrating superior performance in both general quality enhancement and style-specific guidance. Our work provides the first head-level analysis of attention perturbation in diffusion models, uncovering interpretable specialization within attention layers and enabling practical design of effective perturbation strategies.

Linearizing pretrained large language models (LLMs) primarily relies on intra-layer hybrid attention mechanisms to alleviate the quadratic complexity of standard softmax attention. Existing methods perform token routing based on sliding-window partitions, resulting in position-based selection and fails to capture token-specific global importance. Meanwhile, linear attention further suffers from distribution shift caused by learnable feature maps that distort pretrained feature magnitudes. Motivated by these limitations, we propose STILL, an intra-layer hybrid linearization framework for efficiently linearizing LLMs. STILL introduces a Self-Saliency Score with strong local-global consistency, enabling accurate token selection using sliding-window computation, and retains salient tokens for sparse softmax attention while summarizing the remaining context via linear attention. To preserve pretrained representations, we design a Norm-Preserved Feature Map (NP-Map) that decouples feature direction from magnitude and reinjects pretrained norms. We further adopt a unified training-inference architecture with chunk-wise parallelization and delayed selection to improve hardware efficiency. Experiments show that STILL matches or surpasses the original pretrained model on commonsense and general reasoning tasks, and achieves up to a 86.2% relative improvement over prior linearized attention methods on long-context benchmarks.

Despite the rapid advancements of Large Language Models (LLMs), safety risks remain a critical challenge for low-resource languages. Existing safety datasets are predominantly English centric, limiting progress in multilingual safety alignment. As a result, low resource expert models, finetuned on their respective instruction datasets, tend to exhibit higher unsafety rates compared to their high resource counterparts. In this work, we propose a safety aware layer swapping method that transfers safety alignment from an English safety expert to low resource language experts without additional training. To further enhance transfer ability, our method adaptively selects or blends modules based on their degree of specialization. Our approach preserves performance on general language understanding tasks while enhancing safety in the target languages. Experimental results show that the proposed method achieves comparable performance to the language expert on general benchmarks such as MMMLU, BELEBELE, and MGSM, while producing more aligned and less harmful responses on the MultiJail safety benchmark.

This paper presents an application of the biologically realistic JASTAP neural network model to classification tasks. The JASTAP neural network model is presented as an alternative to the basic multi-layer perceptron model. An evolutionary procedure previously applied to the simultaneous solution of feature selection and neural network training on standard multi-layer perceptrons is extended with JASTAP model. Preliminary results on IRIS standard data set give evidence that this extension allows the use of smaller neural networks that can handle noisier data without any degradation in classification accuracy.

Visual geometry transformers have become powerful architectures for multi-view 3D reconstruction, enabling joint prediction of multiple 3D attributes in a feed-forward manner. However, their computational cost grows quadratically with the input sequence length due to the global attention layers inside these models. This limits both their scalability and efficiency. In this work, we address this challenge with a simple yet general strategy: restricting the number of key/value tokens that each query interacts with during global attention. To achieve effective token selection, we introduce a two-stage framework. First, an inter-frame selection step operates at the frame level to identify frames that should be preserved. Second, an intra-frame selection step further discards more redundant tokens within the selected frames. Our analysis highlights the advantage of a diversity-based strategy for inter-frame selection, which ensures broad coverage of the scene. For intra-frame selection, we show that layer-aware sparsification is necessary, with the selection process guided by the entropy of the global attention pattern. Our approach offers a superior speed-accuracy trade-off compared to existing solutions. Extensive experiments show that it accelerates visual geometry transformers by over 85% for scenes with 500 images while maintaining, or even improving, baseline performance, which hints that how our token selection strategy can play a crucial role in future applications of visual geometry transformers. Our project website is available at https://zsh2000.github.io/good-token-hunting.github.io.

Self-attention selects information freely across the sequence, but across depth, Transformers merely add each layer's output to the residual stream, so later layers cannot selectively reuse earlier-layer representations. Recent cross-layer methods improve this flow but operate on hidden states outside attention, adding state beyond the key-value cache at inference--a cost that becomes increasingly salient as modern LLMs compress the cache with grouped-query and multi-head latent attention. We introduce Depth-Attention, which performs this selection inside the attention module itself: before a layer attends over the sequence, its query attends over the keys of earlier layers at the same token position and mixes their values into the value that self-attention then reads. Because Depth-Attention reuses the standard attention queries, keys, and value-cache slots, storing depth-mixed values in place of the original values, it adds no parameters and introduces no persistent inference state beyond the standard key-value cache--the same cache size as a vanilla decoder and less than hidden-state-based cross-layer methods. On Qwen3-style decoders at 1.5B and 3B parameters, Depth-Attention attains the lowest perplexity and the highest average downstream accuracy, improving over the vanilla Transformer by up to 2.3 accuracy points and surpassing strong cross-layer baselines in perplexity and average accuracy, while adding under 0.01% extra arithmetic FLOPs and no additional persistent inference state. The gains hold from 360M to 3B parameters and extend to looped Transformers.

Recent advances in large language model (LLM) pretraining highlight the role of high-quality training data in improving performance. While model-based filtering has proven effective in selecting high-quality subsets from web-scale corpora, especially for high-resource languages, low-resource languages face challenges due to limited availability of annotated data. This work explores extending quality filtering to over 100 languages by proposing a multilingual adaptation approach that converts an existing English quality classifier into a multilingual variant. Our approach proposes training a small multi-layer perceptron on top of Transformer encoder-only model embeddings, using multilingual text as input and scores obtained from English classifiers applied to machine-translated text as labels. Our 1B, 3B and 8B scale experiments show that our approach maintains the downstream LLM benchmark performance of existing multilingual model-based filtering baselines, without harming regional and cultural knowledge benchmarks. To further evaluate cross-lingual generalization, we compare classifier scores of high-quality synthetic data and web samples, and the correlation of classifier scores with LLM-based ones, revealing that the classifier can learn the scoring criteria of its original English variant, even for languages not included in its training data.

Adaptive computation aims to improve language-model inference by tailoring execution to each input. For layer programs, oracle evaluations use known answers to estimate the potential gain from this flexibility, before a practical selector is available. However, a gain from selection does not by itself explain why the chosen programs help. This study examines this distinction using 32 layer-skipping and repetition programs on two models and 4,413 multiple-choice items. The analysis compares their gains over a fixed action selected without the evaluation prompt with those of input-blind perturbations at the same sites, re-evaluating selections on another prompt. With shared option order, the controls give 10.2-11.8 and 15.6-19.4 percentage points of headroom on Qwen3-4B-Base and Llama-3.1-8B, exceeding the real programs' 9.0 and 10.1 in all three random-direction draws per model. They match answer-change rate only, and the ordering depends on the menu: in post hoc comparisons, real programs lead on Llama's repeat-only menu in every draw. A smaller KL-calibrated comparison, including an input-dependent control, favours real programs in point estimate, with inconclusive corrected tests. Fixed letter offsets produce headroom of similar scale. Rotating options sharply reduces both families' headroom, while leaving positive real-minus-control differences of 1.4-2.3 and 3.7-4.5 points; their magnitudes and statistical support depend on further adjustments and the reference. A supplementary generated-answer test finds that search-selected programs keep a 26.0-point advantage over programs selected for other problems after rewording, without a placebo comparison. These results show that substantial headroom can persist across prompts with shared option order without establishing a benefit specific to the selected layer computation; neither ordering against these controls identifies that benefit.

Data selection is of great significance in pre-training large language models, given the variation in quality within the large-scale available training corpora. To achieve this, researchers are currently investigating the use of data influence to measure the importance of data instances, i.e., a high influence score indicates that incorporating this instance to the training set is likely to enhance the model performance. Consequently, they select the top-k instances with the highest scores. However, this approach has several limitations. (1) Computing the influence of all available data is time-consuming. (2) The selected data instances are not diverse enough, which may hinder the pre-trained model's ability to generalize effectively to various downstream tasks. In this paper, we introduce Quad, a data selection approach that considers both quality and diversity by using data influence to achieve state-of-the-art pre-training results. In particular, noting that attention layers capture extensive semantic details, we have adapted the accelerated iHVP computation methods for attention layers, enhancing our ability to evaluate the influence of data, i.e., its quality. For the diversity, Quad clusters the dataset into similar data instances within each cluster and diverse instances across different clusters. For each cluster, if we opt to select data from it, we take some samples to evaluate the influence to prevent processing all instances. To determine which clusters to select, we utilize the classic Multi-Armed Bandit method, treating each cluster as an arm. This approach favors clusters with highly influential instances (ensuring high quality) or clusters that have been selected less frequently (ensuring diversity), thereby well balancing between quality and diversity.

Semantic top-K selection with cross-encoder rerankers underpins of on-device AI services, such as retrieval-augmented generation, agent memory, and personalized recommendation. However, its latency and memory demands dominate end-to-end budgets on edge hardware. Revisiting the objective of top-K selection, we reveal that only relative rankings matter, not exact per-candidate scores. We further observe sequence-level sparsity: relative rankings stabilize early in intermediate layers, allowing pruning opportunities prior to completing full inference. Building on this insight, we propose monolithic forwarding and develop a training-free inference system, GRATING. By maintaining a global view of all candidates, it reduces latency through progressive cluster pruning. It also bounds peak memory usage by strategically overlapping I/O with computation via dual-layer sliding window and chunked execution. We evaluate GRATING against state-of-the-art baselines on rerankers from 0.6B to 8B parameters across Apple M2 and RTX 5070. GRATING consistently reduces latency by up to 89.0% and peak memory by up to 94.9% in microbenchmarks, without any loss in precision. Across three real-world on-device AI applications, GRATING lowers latency by 11.6%-51.0% and peak memory by 18.6%-77.8%, demonstrating substantial improvements in efficiency and deployability.

The massive scaling of Large Language Models (LLMs) has made pretraining increasingly cost-prohibitive. While low-rank representation and orthonormal weight matrices could in principle reduce parameter counts and computational overhead, most existing methods rely on static rank selection and do not enforce weight orthonormality due to high computational cost. This paper introduces TSVD, a framework that maintains low rank and strict orthonormality throughout the training process. It utilizes a spectral energy-based heuristic for adaptive rank selection, and a caching mechanisms to maintain orthonormality. Theoretical analysis justifies the advantage of the approach in pretraining dynamics and experiments across various model scales demonstrate that it is effective empirically. TSVD matches or exceeds the performance of full-parameter baselines while significantly reducing compute requirements. The approach thus offers a well-founded, practical, and scalable path toward efficient high-performance LLM pretraining.

The scaling of large language models (LLMs) has revolutionized their capabilities in various tasks, yet this growth must be matched with efficient computational strategies. The Mixture-of-Experts (MoE) architecture stands out for its ability to scale model size without significantly increasing training costs. Despite their advantages, current MoE models often display parameter inefficiency. For instance, a pre-trained MoE-based LLM with 52 billion parameters might perform comparably to a standard model with 6.7 billion parameters. Being a crucial part of MoE, current routers in different layers independently assign tokens without leveraging historical routing information, potentially leading to suboptimal token-expert combinations and the parameter inefficiency problem. To alleviate this issue, we introduce the Layerwise Recurrent Router for Mixture-of-Experts (RMoE). RMoE leverages a Gated Recurrent Unit (GRU) to establish dependencies between routing decisions across consecutive layers. Such layerwise recurrence can be efficiently parallelly computed for input tokens and introduces negotiable costs. Our extensive empirical evaluations demonstrate that RMoE-based language models consistently outperform a spectrum of baseline models. Furthermore, RMoE integrates a novel computation stage orthogonal to existing methods, allowing seamless compatibility with other MoE architectures. Our analyses attribute RMoE's gains to its effective cross-layer information sharing, which also improves expert selection and diversity. Our code is at https://github.com/qiuzh20/RMoE

Fine-tuning large language models (LLMs) using standard first-order (FO) optimization often drives training toward sharp, poorly generalizing minima. Conversely, zeroth-order (ZO) methods offer stronger exploratory behavior without relying on explicit gradients, yet suffer from slow convergence. More critically, our analysis reveals that in generative tasks, the vast output and search space significantly amplify estimation variance, rendering ZO methods both noisy and inefficient. To address these challenges, we propose Hi-ZFO (Hierarchical Zeroth- and First-Order optimization), a hybrid framework designed to synergize the precision of FO gradients with the exploratory capability of ZO estimation. Hi-ZFO adaptively partitions the model through layer-wise importance profiling, applying precise FO updates to critical layers while leveraging ZO optimization for less sensitive ones. Notably, ZO in Hi-ZFO is not merely a memory-saving surrogate; it is intentionally introduced as a source of "beneficial stochasticity" to help the model escape the local minima where pure FO optimization tends to stagnate. Validated across diverse generative, mathematical, and code reasoning tasks, Hi-ZFO consistently achieves superior performance while significantly reducing the training time. These results demonstrate the effectiveness of hierarchical hybrid optimization for LLM fine-tuning.

This paper formalizes threshold-based selection as an evaluation-gating architecture in which each incumbent is tested before variation and a replacement is generated and evaluated only when contextual pressure exceeds intrinsic strength. The mechanism is instantiated as Leaf Abscission Optimization (LAO), using rank-based strength, a phenological seasonal signal, diversity modulation, environmental pressure, and a base regrowth kernel. A blocked two-to-the-fourth-power factorial analysis at dimension 10 on the CEC 2017 suite reduces the original multi-layer design to a parsimonious core: drift is harmful, while the other three auxiliary layers show no robust independent evidence of benefit. The resulting LAO-Core attains the third-best mean Friedman rank among nine optimizers at dimensions 10, 30, and 50 under the equal evaluation budget. A four-budget sweep shows budget-dependent relative performance, with adaptive differential-evolution baselines gaining relative advantage at larger budgets; the nine-cell dimension-budget analysis establishes neither an evaluation-budget-per-dimension-only law nor a statistically significant dimension-budget interaction. A paired intervention shows that diversity modulation changes late-run replacement behaviour without a detectable effect on final error at the tested budget. The evidence supports LAO as a parsimonious evaluation-gating mechanism with regime-qualified competitiveness, rather than as a generally superior optimizer.

Long-form video understanding poses a significant challenge for video large language models (VideoLLMs) due to prohibitively high computational and memory demands. In this paper, we propose FlexSelect, a flexible and efficient token selection strategy for processing long videos. FlexSelect identifies and retains the most semantically relevant content by leveraging cross-modal attention patterns from a reference transformer layer. It comprises two key components: (1) a training-free token ranking pipeline that leverages faithful cross-modal attention weights to estimate each video token's importance, and (2) a rank-supervised lightweight selector that is trained to replicate these rankings and filter redundant tokens. This generic approach can be seamlessly integrated into various VideoLLM architectures, such as LLaVA-Video, InternVL and Qwen-VL, serving as a plug-and-play module to extend their temporal context length. Empirically, FlexSelect delivers strong gains across multiple long-video benchmarks including VideoMME, MLVU, LongVB, and LVBench. Moreover, it achieves significant speed-ups (for example, up to 9 times on a LLaVA-Video-7B model), highlighting FlexSelect's promise for efficient long-form video understanding. Project page available at: https://yunzhuzhang0918.github.io/flex_select

The performance of a Convolutional Neural Network (CNN) depends on its hyperparameters, like the number of layers, kernel sizes, or the learning rate for example. Especially in smaller networks and applications with limited computational resources, optimisation is key. We present a fast and efficient approach for CNN architecture selection. Taking into account time consumption, precision and robustness, we develop a heuristic to quickly and reliably assess a network's performance. In combination with Bayesian optimisation (BO), to effectively cover the vast parameter space, our contribution offers a plain and powerful architecture search for this machine learning technique.

Everyday tasks come with a target, and pretraining models around this target is what turns them into experts. In this paper, we study target-oriented language model (LM) pretraining by introducing Neuron-Activated Graph Ranking (NAG-based Ranking), a training-free and interpretable framework for target pretraining data selection. Rather than using black-box representations, our approach directly characterizes each target input by a sparse set of high-impact neurons in any off-the-shelf LLMs. Concretely, we quantify neuron impact and select the most influential neurons across layers into a compact Neuron-Activated Graph (NAG), and rank candidate data by NAG similarity to target examples. We conduct experiments across six benchmarks, where our NAG-based Ranking improves target-oriented pretraining by 4.9% on average over random sampling, and also outperforms state-of-the-art baselines by 5.3% accuracy on HellaSwag. It also remains effective under a more applicable multi-target setting, where our best setup surpasses two baselines by 1.1% and 4.1%, respectively. Furthermore, we provide a comprehensive analysis on why and how our NAG works, e.g., deactivating NAG-selected neurons (only 0.12% of all) causes a 23.5% performance collapse, and restricting NAG to the final layer incurs a 4.1% average drop, indicating that NAG captures a sparse "functional backbone" for learning target features. We release the code at https://github.com/asillycat/NAG.

With the advancements in long-context inference capabilities of large language models (LLMs), the KV cache has become one of the foundational components. However, its substantial GPU memory consumption makes KV cache compression a key technique for enabling efficient LLM inference in industrial scenarios. While recent studies have focused on optimizing the memory occupied by the KV cache, they overlook two critical factors: preserving semantic coherence and considering task-specific characteristic during compression. To address these limitations, we propose a novel task-adaptive KV cache window selection method, WindowKV. WindowKV dynamically selects local semantic windows consisting of consecutive tokens, according to task-specific characteristics, ensuring the retained KV cache captures continuous, essential context. Additionally, we introduce an intra-group layer KV cache indices sharing strategy to reduce computational overhead, achieving a balance between performance and efficiency. We rigorously evaluate WindowKV on the LongBench benchmark, and the results demonstrate that it maintains a performance comparable to full KV cache retention while using only 12% of the original KV cache, significantly reducing memory requirements. Furthermore, our method also achieves state-of-the-art results in the Needle-in-a-Haystack evaluation, highlighting its effectiveness and robustness.

Recent advancements in federated learning (FL) seek to increase client-level performance by fine-tuning client parameters on local data or personalizing architectures for the local task. Existing methods for such personalization either prune a global model or fine-tune a global model on a local client distribution. However, these existing methods either personalize at the expense of retaining important global knowledge, or predetermine network layers for fine-tuning, resulting in suboptimal storage of global knowledge within client models. Enlightened by the lottery ticket hypothesis, we first introduce a hypothesis for finding optimal client subnetworks to locally fine-tune while leaving the rest of the parameters frozen. We then propose a novel FL framework, FedSelect, using this procedure that directly personalizes both client subnetwork structure and parameters, via the simultaneous discovery of optimal parameters for personalization and the rest of parameters for global aggregation during training. We show that this method achieves promising results on CIFAR-10.

In-context learning (ICL) facilitates large language models (LLMs) exhibiting spectacular emergent capabilities in various scenarios. Unfortunately, introducing demonstrations easily makes the prompt length explode, bringing a significant burden to hardware. In addition, random demonstrations usually achieve limited improvements in ICL, necessitating demonstration selection among accessible candidates. Previous studies introduce extra modules to perform demonstration compression or selection independently. In this paper, we propose an ICL framework UniICL, which Unifies demonstration selection and compression, and final response generation via a single frozen LLM. Specifically, UniICL first projects actual demonstrations and inference text inputs into short virtual tokens, respectively. Then, virtual tokens are applied to select suitable demonstrations by measuring semantic similarity within latent space among candidate demonstrations and inference input. Finally, inference text inputs together with selected virtual demonstrations are fed into the same frozen LLM for response generation. Notably, UniICL is a parameter-efficient framework that only contains 17M trainable parameters originating from the projection layer. We conduct experiments and analysis over in- and out-domain datasets of both generative and understanding tasks, encompassing ICL scenarios with plentiful and limited demonstration candidates. Results show that UniICL effectively unifies 12 times compression, demonstration selection, and response generation, efficiently scaling up the baseline from 4-shot to 64-shot ICL in IMDb with 24 GB CUDA allocation

Large language models (LLMs) can store a significant amount of factual knowledge in their parameters. However, their parametric knowledge may conflict with the information provided in the context -- this phenomenon, known as context-memory knowledge conflicts, can lead to undesirable model behaviour, such as reliance on outdated or incorrect information. Analysing the internal activations of LLMs, we find that they can internally register the signals of knowledge conflict at mid-layers. Such signals allow us to detect whether a knowledge conflict occurs and use inference-time intervention strategies to resolve it. In this work, we propose SpARE, a training-free representation engineering method that uses pre-trained sparse auto-encoders (SAEs) to control the knowledge selection behaviour of LLMs. SpARE identifies the functional features that control the knowledge selection behaviours and applies them to edit the internal activations of LLMs at inference time. Our experimental results show that SpARE can effectively control the usage of either knowledge source to resolve knowledge conflict in open-domain question-answering tasks, surpassing existing representation engineering methods (+10%) as well as contrastive decoding methods (+15%).

Large pre-trained models achieve remarkable performance in vision tasks but are impractical for fine-tuning due to high computational and storage costs. Parameter-Efficient Fine-Tuning (PEFT) methods mitigate this issue by updating only a subset of parameters; however, most existing approaches are task-agnostic, failing to fully exploit task-specific adaptations, which leads to suboptimal efficiency and performance. To address this limitation, we propose Task-Relevant Parameter and Token Selection (TR-PTS), a task-driven framework that enhances both computational efficiency and accuracy. Specifically, we introduce Task-Relevant Parameter Selection, which utilizes the Fisher Information Matrix (FIM) to identify and fine-tune only the most informative parameters in a layer-wise manner, while keeping the remaining parameters frozen. Simultaneously, Task-Relevant Token Selection dynamically preserves the most informative tokens and merges redundant ones, reducing computational overhead. By jointly optimizing parameters and tokens, TR-PTS enables the model to concentrate on task-discriminative information. We evaluate TR-PTS on benchmark, including FGVC and VTAB-1k, where it achieves state-of-the-art performance, surpassing full fine-tuning by 3.40% and 10.35%, respectively. The code are available at https://github.com/synbol/TR-PTS.

The quadratic complexity of attention remains the central bottleneck in long-context inference for large language models. Prior acceleration methods either sparsify the attention map with structured patterns or permanently evict tokens at specific layers, which can retain irrelevant tokens or rely on irreversible early decisions despite the layer-/head-wise dynamics of token importance. In this paper, we propose Token Sparse Attention, a lightweight and dynamic token-level sparsification mechanism that compresses per-head Q, K, V to a reduced token set during attention and then decompresses the output back to the original sequence, enabling token information to be reconsidered in subsequent layers. Furthermore, Token Sparse Attention exposes a new design point at the intersection of token selection and sparse attention. Our approach is fully compatible with dense attention implementations, including Flash Attention, and can be seamlessly composed with existing sparse attention kernels. Experimental results show that Token Sparse Attention consistently improves accuracy-latency trade-off, achieving up to times3.23 attention speedup at 128K context with less than 1% accuracy degradation. These results demonstrate that dynamic and interleaved token-level sparsification is a complementary and effective strategy for scalable long-context inference.

Visual token pruning is a promising approach for reducing the computational cost of vision-language models (VLMs), and existing methods often rely on early pruning decisions to improve efficiency. While effective on coarse-grained reasoning tasks, they suffer from significant performance degradation on tasks requiring fine-grained visual details. Through layer-wise analysis, we reveal substantial discrepancies in visual token importance across layers, showing that tokens deemed unimportant at shallow layers can later become highly relevant for text-conditioned reasoning. To avoid irreversible critical information loss caused by premature pruning, we introduce a new pruning paradigm, termed bypass, which preserves unselected visual tokens and forwards them to subsequent pruning stages for re-evaluation. Building on this paradigm, we propose SwiftVLM, a simple and training-free method that performs pruning at model-specific layers with strong visual token selection capability, while enabling independent pruning decisions across layers. Experiments across multiple VLMs and benchmarks demonstrate that SwiftVLM consistently outperforms existing pruning strategies, achieving superior accuracy-efficiency trade-offs and more faithful visual token selection behavior.

Self-improvement in AI agents has emerged as a key research frontier: systems that modify their own prompts, workflows, and decision rules based on accumulated operational experience. The state-of-the-art Self-Harness framework [1] achieves 14--21% improvement on Terminal-Bench-2.0 by mining failure clusters and patching the agent harness. However, Self-Harness optimises only one dimension -- the prompt harness -- leaving behavioural principles and workflow topology unchanged. We propose APEX (Adaptive Principle EXtraction), a three-layer co-evolution framework that simultaneously evolves: (L1) the harness via failure-mode patching, (L2) behavioural principles via success-trace distillation [2], and (L3) the agent workflow topology via structural fitness-based selection [6]. We implement APEX on Joe [13], a production-grade super AI Agent built on NVIDIA Nemotron and designed as an Edge AI Agent Factory for the NVIDIA Agent Challenge 2026, managing a 15-node compute fleet using 114 real task traces collected over 18 days. APEX achieves an APEX Health Score of 0.570 (+90% vs. baseline 0.300) in a single evolutionary run, distilling 6 novel reusable principles and selecting a research-first workflow topology scoring 0.900 (+20%). Our results demonstrate that multi-dimensional co-evolution substantially outperforms single-axis harness optimisation, at a cost of only 4 LLM calls (~270 s) on a local qwen2.5-coder:32b instance.

Approaches for compressing large-language models using low-rank decomposition have made strides, particularly with the introduction of activation and loss-aware SVD, which improves the trade-off between decomposition rank and downstream task performance. Despite these advancements, a persistent challenge remains--selecting the optimal ranks for each layer to jointly optimise compression rate and downstream task accuracy. Current methods either rely on heuristics that can yield sub-optimal results due to their limited discrete search space or are gradient-based but are not as performant as heuristic approaches without post-compression fine-tuning. To address these issues, we propose Learning to Low-Rank Compress (LLRC), a gradient-based approach which directly learns the weights of masks that select singular values in a fine-tuning-free setting. Using a calibration dataset, we train only the mask weights to select fewer and fewer singular values while minimising the divergence of intermediate activations from the original model. Our approach outperforms competing ranking selection methods that similarly require no post-compression fine-tuning across various compression rates on common-sense reasoning and open-domain question-answering tasks. For instance, with a compression rate of 20% on Llama-2-13B, LLRC outperforms the competitive Sensitivity-based Truncation Rank Searching (STRS) on MMLU, BoolQ, and OpenbookQA by 12%, 3.5%, and 4.4%, respectively. Compared to other compression techniques, our approach consistently outperforms fine-tuning-free variants of SVD-LLM and LLM-Pruner across datasets and compression rates. Our fine-tuning-free approach also performs competitively with the fine-tuning variant of LLM-Pruner.

Precise crop yield prediction is essential for improving agricultural practices and ensuring crop resilience in varying climates. Integrating weather data across the growing season, especially for different crop varieties, is crucial for understanding their adaptability in the face of climate change. In the MLCAS2021 Crop Yield Prediction Challenge, we utilized a dataset comprising 93,028 training records to forecast yields for 10,337 test records, covering 159 locations across 28 U.S. states and Canadian provinces over 13 years (2003-2015). This dataset included details on 5,838 distinct genotypes and daily weather data for a 214-day growing season, enabling comprehensive analysis. As one of the winning teams, we developed two novel convolutional neural network (CNN) architectures: the CNN-DNN model, combining CNN and fully-connected networks, and the CNN-LSTM-DNN model, with an added LSTM layer for weather variables. Leveraging the Generalized Ensemble Method (GEM), we determined optimal model weights, resulting in superior performance compared to baseline models. The GEM model achieved lower RMSE (5.55% to 39.88%), reduced MAE (5.34% to 43.76%), and higher correlation coefficients (1.1% to 10.79%) when evaluated on test data. We applied the CNN-DNN model to identify top-performing genotypes for various locations and weather conditions, aiding genotype selection based on weather variables. Our data-driven approach is valuable for scenarios with limited testing years. Additionally, a feature importance analysis using RMSE change highlighted the significance of location, MG, year, and genotype, along with the importance of weather variables MDNI and AP.

Recent advances in deep learning have mainly relied on Transformers due to their data dependency and ability to learn at scale. The attention module in these architectures, however, exhibits quadratic time and space in input size, limiting their scalability for long-sequence modeling. Despite recent attempts to design efficient and effective architecture backbone for multi-dimensional data, such as images and multivariate time series, existing models are either data independent, or fail to allow inter- and intra-dimension communication. Recently, State Space Models (SSMs), and more specifically Selective State Space Models, with efficient hardware-aware implementation, have shown promising potential for long sequence modeling. Motivated by the success of SSMs, we present MambaMixer, a new architecture with data-dependent weights that uses a dual selection mechanism across tokens and channels, called Selective Token and Channel Mixer. MambaMixer connects selective mixers using a weighted averaging mechanism, allowing layers to have direct access to early features. As a proof of concept, we design Vision MambaMixer (ViM2) and Time Series MambaMixer (TSM2) architectures based on the MambaMixer block and explore their performance in various vision and time series forecasting tasks. Our results underline the importance of selective mixing across both tokens and channels. In ImageNet classification, object detection, and semantic segmentation tasks, ViM2 achieves competitive performance with well-established vision models and outperforms SSM-based vision models. In time series forecasting, TSM2 achieves outstanding performance compared to state-of-the-art methods while demonstrating significantly improved computational cost. These results show that while Transformers, cross-channel attention, and MLPs are sufficient for good performance in time series forecasting, neither is necessary.

Sparse models, including sparse Mixture-of-Experts (MoE) models, have emerged as an effective approach for scaling Transformer models. However, they often suffer from computational inefficiency since a significant number of parameters are unnecessarily involved in computations via multiplying values by zero or low activation values. To address this issue, we present \tool, a novel MoE designed to enhance both the efficacy and efficiency of sparse MoE models. \tool leverages small experts and a threshold-based router to enable tokens to selectively engage only essential parameters. Our extensive experiments on language modeling and machine translation tasks demonstrate that \tool can enhance model performance while decreasing the computation load at MoE layers by over 50\% without sacrificing performance. Furthermore, we present the versatility of \tool by applying it to dense models, enabling sparse computation during inference. We provide a comprehensive analysis and make our code available at https://anonymous.4open.science/r/XMoE.

High-dimensional decision-making tasks, such as business partner selection, involve evaluating large candidate pools with heterogeneous numerical, categorical, and textual features. While large language models (LLMs) offer strong in-context reasoning capabilities, single-agent or debate-style systems often struggle with scalability and consistency in such settings. We propose PartnerMAS, a hierarchical multi-agent framework that decomposes evaluation into three layers: a Planner Agent that designs strategies, Specialized Agents that perform role-specific assessments, and a Supervisor Agent that integrates their outputs. To support systematic evaluation, we also introduce a curated benchmark dataset of venture capital co-investments, featuring diverse firm attributes and ground-truth syndicates. Across 140 cases, PartnerMAS consistently outperforms single-agent and debate-based multi-agent baselines, achieving up to 10--15\% higher match rates. Analysis of agent reasoning shows that planners are most responsive to domain-informed prompts, specialists produce complementary feature coverage, and supervisors play an important role in aggregation. Our findings demonstrate that structured collaboration among LLM agents can generate more robust outcomes than scaling individual models, highlighting PartnerMAS as a promising framework for high-dimensional decision-making in data-rich domains.

The choice of initial noise significantly affects the quality and prompt alignment of video diffusion models, where different noise seeds for the same prompt can lead to drastically different generations. While recent methods rely on externally designed priors such as frequency filters or inter-frame smoothing, they often overlook internal model signals that indicate which noise seeds are inherently preferable. To address this, we propose ANSE (Active Noise Selection for Generation), a model-aware framework that selects high-quality noise seeds by quantifying attention-based uncertainty. At its core is BANSA (Bayesian Active Noise Selection via Attention), an acquisition function that measures entropy disagreement across multiple stochastic attention samples to estimate model confidence and consistency. For efficient inference-time deployment, we introduce a Bernoulli-masked approximation of BANSA that enables score estimation using a single diffusion step and a subset of attention layers. Experiments on CogVideoX-2B and 5B demonstrate that ANSE improves video quality and temporal coherence with only an 8% and 13% increase in inference time, respectively, providing a principled and generalizable approach to noise selection in video diffusion. See our project page: https://anse-project.github.io/anse-project/

Federated learning is a distributed learning paradigm in which multiple mobile clients train a global model while keeping data local. These mobile clients can have various available memory and network bandwidth. However, to achieve the best global model performance, how we can utilize available memory and network bandwidth to the maximum remains an open challenge. In this paper, we propose to assign each client a subset of the global model, having different layers and channels on each layer. To realize that, we design a constrained model search process with early stop to improve efficiency of finding the models from such a very large space; and a data-free knowledge distillation mechanism to improve the global model performance when aggregating models of such different structures. For fair and reproducible comparison between different solutions, we develop a new system, which can directly allocate different memory and bandwidth to each client according to memory and bandwidth logs collected on mobile devices. The evaluation shows that our solution can have accuracy increase ranging from 2.43\% to 15.81\% and provide 5\% to 40\% more memory and bandwidth utilization with negligible extra running time, comparing to existing state-of-the-art system-heterogeneous federated learning methods under different available memory and bandwidth, non-i.i.d.~datasets, image and text tasks.

Social highlighters let people mark passages that matter to them. We ask how much of an individual is recoverable from these naturalistic traces, using a co-readership identity control (the same document highlighted by many users) that holds document and topic fixed and asks whether a person's own history predicts their marks better than another reader's does. We separate generic salience (structure), crowd salience (what others marked), and personal salience (the individual residual). First, highlighting is social: which sentences you mark is predicted far better by the crowd than by structure or by a personal model, and even a well-estimated crowd, an information-privileged baseline that sees others' marks on the same document, beats a frontier LLM twin built from your other-document history; the within-document personal signal is at most a whisper (own-vs-other gap +0.017 by an embedding scorer, small but significant). Second, in sharp contrast, individuality lives in selection: asked which of the already-salient passages are yours, your own history is a strong, leakage-free predictor (gap +0.14). A topic decomposition shows this is largely stable thematic preference: it shrinks ~6-8x against a topically-matched peer, and a thin residual cannot be separated from finer topic. The non-obvious part is an asymmetry: under the same scorer the individual signal is ~6-8x weaker in salience than in selection. Methodologically, naive history-conditioning evaluations leak (the target's own marks enter the profile in ~42% of pairs, inflating personal scores by up to +0.15 AP) and small crowds overstate personalization; our results are leakage-free, use a dense crowd, and a model-matched control. Highlights carry a genuine individual signature, but a thin layer over a strong shared one, surfacing far more in which salient things a person selects than in what is salient.

Long-context prefill remains expensive because full/GQA layers still score the historical sequence, even in hybrid models with local, sparse, linear, or recurrent components. We study how much dense attention is needed to preserve task-level behavior under explicit support granularity and top-k budgets. We introduce an attention-mass top-k oracle for existing GQA checkpoints: for each layer and query position, it computes dense attention, selects head-averaged token support, and recomputes attention only on that support. The oracle is a diagnostic reference, not a deployable accelerator, and separates sparse-budget feasibility from indexer error and runtime realization effects. On Qwen-family retrieval-heavy evaluations, the longest per-query oracle rows stay within 1 point of dense, and a Qwen3.5-9B RULER-style sweep from 4K to 100K stays within 0.48 points. Guided by the oracle, we derive a head-collapsed auxiliary indexer trained by KL distillation from dense attention-mass distributions while keeping the backbone frozen. With separately distilled Qwen3.5-0.8B and Qwen3.5-9B indexers, the reported 16K/32K validation macro gaps are +2.04 and +1.13 points, treated as quality preservation rather than improvement; fused selection-block-shared support can introduce a larger realization gap. Preliminary single-card TTFT measurements show distilled-indexer sparse serving speedups of 1.71x for Qwen3.5-0.8B on NPU and 1.93x for Qwen3.5-9B on GPU against its dense FlashAttention-2 baseline. Additional random-init stress rows reach 3.44x, indicating sparse-runtime headroom but not validated output quality. This first release separates oracle feasibility, distilled-indexer quality, and runtime headroom, leaving a fully matched quality-latency frontier to future work.

Small Language Models (SLMs) offer a balance between capability and computational feasibility. Neural scaling laws inform their optimal training, suggesting that they possess rich internal representations that scale with their size. However, deploying even these SLMs can be challenging under strict resource constraints. Language model probing provides methods for analyzing the linguistic knowledge encoded in a model's internals. We propose ProbScale, a framework that unifies insights from scaling laws and probing to identify parameter-efficient subnetworks within pre-trained SLMs. ProbScale utilizes the high-quality representations of well-scaled SLMs and uses task-specific probes to mathematically quantify the relevance of each layer for target downstream capabilities. This allows selecting subnetworks that optimally trade off performance against parameter size. We formulate the subnetwork selection as finding a layer subset maximizing aggregated, task-weighted probe performance under a parameter budget. Experiments on representative SLMs such as RoBERTa-Large and T5-Base demonstrate that ProbScale identifies subnetworks achieving significant parameter reduction, from 5 to 10 times, while maintaining high performance (95% to 98% of the original SLMs) on targeted tasks, outperforming heuristic baselines.

Post-training model pruning is a promising solution, yet it faces a trade-off: simple heuristics that zero weights are fast but degrade accuracy, while principled joint optimization methods recover accuracy but are computationally infeasible at modern scale. One-shot methods such as SparseGPT offer a practical trade-off in optimality by applying efficient, approximate heuristic weight updates. To close this gap, we introduce OPTIMA, a practical one-shot post-training pruning method that balances accuracy and scalability. OPTIMA casts layer-wise weight reconstruction after mask selection as independent, row-wise Quadratic Programs (QPs) that share a common layer Hessian. Solving these QPs yields the per-row globally optimal update with respect to the reconstruction objective given the estimated Hessian. The shared-Hessian structure makes the problem highly amenable to batching on accelerators. We implement an accelerator-friendly QP solver that accumulates one Hessian per layer and solves many small QPs in parallel, enabling one-shot post-training pruning at scale on a single accelerator without fine-tuning. OPTIMA integrates with existing mask selectors and consistently improves zero-shot performance across multiple LLM families and sparsity regimes, yielding up to 3.97% absolute accuracy improvement. On an NVIDIA H100, OPTIMA prunes a 8B-parameter transformer end-to-end in 40 hours with 60GB peak memory. Together, these results set a new state-of-the-art accuracy-efficiency trade-offs for one-shot post-training pruning.

Recent works on neural network pruning advocate that reducing the depth of the network is more effective in reducing run-time memory usage and accelerating inference latency than reducing the width of the network through channel pruning. In this regard, some recent works propose depth compression algorithms that merge convolution layers. However, the existing algorithms have a constricted search space and rely on human-engineered heuristics. In this paper, we propose a novel depth compression algorithm which targets general convolution operations. We propose a subset selection problem that replaces inefficient activation layers with identity functions and optimally merges consecutive convolution operations into shallow equivalent convolution operations for efficient end-to-end inference latency. Since the proposed subset selection problem is NP-hard, we formulate a surrogate optimization problem that can be solved exactly via two-stage dynamic programming within a few seconds. We evaluate our methods and baselines by TensorRT for a fair inference latency comparison. Our method outperforms the baseline method with higher accuracy and faster inference speed in MobileNetV2 on the ImageNet dataset. Specifically, we achieve 1.41times speed-up with 0.11\%p accuracy gain in MobileNetV2-1.0 on the ImageNet.

Zero-shot visual anomaly detection has achieved remarkable progress, with recent vision-only approaches further improving performance while simplifying the inference pipeline. However, existing methods typically perform dense computation over all images and spatial tokens, despite the fact that normal samples dominate real-world scenarios and anomalies usually occupy only small regions. Token pruning offers a promising solution, but introduces an asymmetric pruning risk in anomaly detection: retaining normal tokens mainly incurs redundant computation, whereas removing anomalous tokens may eliminate the only evidence for detection and localization. This risk is particularly severe in early layers, where pruning provides the greatest computational benefit but anomaly semantics remain unreliable. We propose KeepAD, a defect-preserving token pruning framework that formulates token selection as high-recall, anomaly-aware routing. In shallow layers, KeepAD combines coverage-preserving selection over local 2times2 patch neighborhoods with deterministic anomaly rescue to reduce the risk of discarding subtle defects. In deeper layers, frozen normal and abnormal prototypes guide pruning under an image-adaptive token budget, aggressively removing low-risk normal tokens while preserving local anomaly evidence. Dense-to-sparse self-distillation further supervises early token routing without introducing additional inference overhead. Experiments on six industrial and seven medical zero-shot anomaly detection benchmarks show that KeepAD reduces the token retention ratio to below 20%, while limiting the average degradation in image-level and pixel-level AUROC to within 2.7 percentage points. At the most aggressive operating point, KeepAD achieves a 7.9times speedup over the strongest CLIP-based baseline.

The rapid development and adoption of Generative AI (GAI) technology in the form of chatbots such as ChatGPT and Claude has greatly increased interest in agentic machines. This paper introduces the Autonomous Cognitive Entity (ACE) model, a novel framework for a cognitive architecture, enabling machines and software agents to operate more independently. Drawing inspiration from the OSI model, the ACE framework presents layers of abstraction to conceptualize artificial cognitive architectures. The model is designed to harness the capabilities of the latest generative AI technologies, including large language models (LLMs) and multimodal generative models (MMMs), to build autonomous, agentic systems. The ACE framework comprises six layers: the Aspirational Layer, Global Strategy, Agent Model, Executive Function, Cognitive Control, and Task Prosecution. Each layer plays a distinct role, ranging from setting the moral compass and strategic thinking to task selection and execution. The ACE framework also incorporates mechanisms for handling failures and adapting actions, thereby enhancing the robustness and flexibility of autonomous agents. This paper introduces the conceptual framework and proposes implementation strategies that have been tested and observed in industry. The goal of this paper is to formalize this framework so as to be more accessible.

Large language models (LLMs) store vast amounts of information, making them powerful yet raising privacy and safety concerns when selective knowledge removal is required. Existing unlearning strategies, ranging from gradient-based fine-tuning and model editing to sparse autoencoder (SAE) steering, either lack interpretability or fail to provide a robust defense against adversarial prompts. We propose SAE-Guided Subspace Projection Unlearning (SSPU), a novel framework that leverages SAE features to drive targeted updates in the model's parameter space, enabling precise, interpretable, and robust unlearning. SSPU's three-stage pipeline performs data-driven layer and feature selection, subspace construction via QR decomposition, and constrained optimization that controls activations into an "irrelevant" subspace while preserving retained knowledge. Overall, we use SAE features to construct a subspace that supervises unlearning, refining the loss and adding a regularization term to guide interpretable parameter updates. In experiments on the WMDP-Cyber forget set and three utility benchmarks (MMLU, TruthfulQA, GSM8K), SSPU reduces harmful knowledge accuracy by 3.22% compared to the strongest baseline. It also improves adversarial robustness, lowering malicious accuracy under jailbreak prompts compared to baselines. Our findings expose the limitations of prior unlearning methods and demonstrate how interpretable subspace-guided optimization can achieve robust, controllable model behavior.

Recently, there has been a significant upsurge of interest in leveraging large language models (LLMs) to assist scientific discovery. However, most LLMs only focus on general science, while they lack domain-specific knowledge, such as chemical molecules and amino acid sequences. To bridge these gaps, we introduce SciDFM, a mixture-of-experts LLM, which is trained from scratch and is able to conduct college-level scientific reasoning and understand molecules and amino acid sequences. We collect a large-scale training corpus containing numerous scientific papers and books from different disciplines as well as data from domain-specific databases. We further fine-tune the pre-trained model on lots of instruction data to improve performances on downstream benchmarks. From experiment results, we show that SciDFM achieves strong performance on general scientific benchmarks such as SciEval and SciQ, and it reaches a SOTA performance on domain-specific benchmarks among models of similar size. We further analyze the expert layers and show that the results of expert selection vary with data from different disciplines. To benefit the broader research community, we open-source SciDFM at https://huggingface.co/OpenDFM/SciDFM-MoE-A5.6B-v1.0.