new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 16

Auditing Demonstration Curation Metrics: Action-Only Scorers Fail on the Structural Defects That Degrade Imitation Policies

Imitation-learning policies inherit the quality of the demonstrations they are trained on, and a growing set of curation metrics promise to score and filter low-quality demonstrations automatically. These metrics are each validated on different data with different protocols, so it is unclear which of them actually identify the demonstrations that harm a policy. We build a controlled testbed in which demonstration defects are injected with known type, and audit seven curation metrics along two axes: how well each separates defective from clean demonstrations, and whether training a behavior-cloning policy on each metric's curated subset improves task success. We study two defect regimes. Subtle perturbations (correlated action noise, tremor, truncation) are detectable by multivariate outlier scoring and, once removed, recover the full downstream gap. Structural errors, where the demonstration executes a wrong action at a key moment, are invisible to every action-only metric we test, and two of them are inverted: they score defective demonstrations as higher quality and, used for curation, tend to leave the policy at or below the uncurated baseline rather than above it. Only metrics that examine the state trajectory detect structural errors, and even the best of them recovers just a third of the downstream gap. High detection accuracy does not guarantee downstream improvement. We release the testbed and all curation implementations.

  • 1 authors
·
Jun 3

Power Battery Detection

Power batteries are essential components in electric vehicles, where internal structural defects can pose serious safety risks. We conduct a comprehensive study on a new task, power battery detection (PBD), which aims to localize the dense endpoints of cathode and anode plates from industrial X-ray images for quality inspection. Manual inspection is inefficient and error-prone, while traditional vision algorithms struggle with densely packed plates, low contrast, scale variation, and imaging artifacts. To address this issue and drive more attention into this meaningful task, we present PBD5K, the first large-scale benchmark for this task, consisting of 5,000 X-ray images from nine battery types with fine-grained annotations and eight types of real-world visual interference. To support scalable and consistent labeling, we develop an intelligent annotation pipeline that combines image filtering, model-assisted pre-labeling, cross-verification, and layered quality evaluation. We formulate PBD as a point-level segmentation problem and propose MDCNeXt, a model designed to extract and integrate multi-dimensional structure clues including point, line, and count information from the plate itself. To improve discrimination between plates and suppress visual interference, MDCNeXt incorporates two state space modules. The first is a prompt-filtered module that learns contrastive relationships guided by task-specific prompts. The second is a density-aware reordering module that refines segmentation in regions with high plate density. In addition, we propose a distance-adaptive mask generation strategy to provide robust supervision under varying spatial distributions of anode and cathode positions. The source code and datasets will be publicly available at https://github.com/Xiaoqi-Zhao-DLUT/X-ray-PBD{PBD5K}.

  • 13 authors
·
Aug 11, 2025

Cracks in the Foundation: A Civil Infrastructure Dataset to Challenge Vision Foundation Models

Automated structural health monitoring is essential to prevent catastrophic infrastructure failures. Precise, pixel-level defect segmentation is needed to accurately assess structural integrity, but progress in defect segmentation for civil infrastructures has been held back by an extreme scarcity of data, which requires costly expert annotation. The need for data is accentuated by algorithmic hurdles intrinsic to the problem, including center-bias and the need to rely more on shape when inspecting nearly textureless building materials. To remove the bottleneck, we introduce Cracks in the Foundation (CiF), the largest and most detailed civil infrastructure (instance) segmentation dataset to date, comprising approx150,000 high-resolution images meticulously curated over five years in collaboration with civil engineering experts. With the help of this unprecedented data source, we expose a blind spot of current visual AI: despite the advent of promptable Foundation Models (FMs) and Vision Language Models (VLMs), and despite the impressive abilities of today's specialised segmentation models, it turns out that dense image understanding in the built environment is nowhere near solved. Our evaluations indicate that even the most recent zero-shot FMs face significant challenges when deployed on real-world infrastructure and even the performance of specialised models with domain-specific supervision plateaus at approx25% mAP. CiF establishes inspection of civil infrastructure, an elementary and seemingly easy perceptual task, as an open challenge that reveals fundamental weaknesses of present-day models trained predominantly on internet images, literally and figuratively highlighting cracks in the current foundation model paradigm.

  • 9 authors
·
May 18

ArtifactWorld: Scaling 3D Gaussian Splatting Artifact Restoration via Video Generation Models

3D Gaussian Splatting (3DGS) delivers high-fidelity real-time rendering but suffers from geometric and photometric degradations under sparse-view constraints. Current generative restoration approaches are often limited by insufficient temporal coherence, a lack of explicit spatial constraints, and a lack of large-scale training data, resulting in multi-view inconsistencies, erroneous geometric hallucinations, and limited generalization to diverse real-world artifact distributions. In this paper, we present ArtifactWorld, a framework that resolves 3DGS artifact repair through systematic data expansion and a homogeneous dual-model paradigm. To address the data bottleneck, we establish a fine-grained phenomenological taxonomy of 3DGS artifacts and construct a comprehensive training set of 107.5K diverse paired video clips to enhance model robustness. Architecturally, we unify the restoration process within a video diffusion backbone, utilizing an isomorphic predictor to localize structural defects via an artifact heatmap. This heatmap then guides the restoration through an Artifact-Aware Triplet Fusion mechanism, enabling precise, intensity-guided spatio-temporal repair within native self-attention. Extensive experiments demonstrate that ArtifactWorld achieves state-of-the-art performance in sparse novel view synthesis and robust 3D reconstruction. Code and dataset will be made public.

  • 3 authors
·
Apr 13 1

Bridging the Data Gap: Spatially Conditioned Diffusion Model for Anomaly Generation in Photovoltaic Electroluminescence Images

Reliable anomaly detection in photovoltaic (PV) modules is critical for maintaining solar energy efficiency. However, developing robust computer vision models for PV inspection is constrained by the scarcity of large-scale, diverse, and balanced datasets. This study introduces PV-DDPM, a spatially conditioned denoising diffusion probabilistic model that generates anomalous electroluminescence (EL) images across four PV cell types: multi-crystalline silicon (multi-c-Si), mono-crystalline silicon (mono-c-Si), half-cut multi-c-Si, and interdigitated back contact (IBC) with dogbone interconnect. PV-DDPM enables controlled synthesis of single-defect and multi-defect scenarios by conditioning on binary masks representing structural features and defect positions. To the best of our knowledge, this is the first framework that jointly models multiple PV cell types while supporting simultaneous generation of diverse anomaly types. We also introduce E-SCDD, an enhanced version of the SCDD dataset, comprising 1,000 pixel-wise annotated EL images spanning 30 semantic classes, and 1,768 unlabeled synthetic samples. Quantitative evaluation shows our generated images achieve a Fréchet Inception Distance (FID) of 4.10 and Kernel Inception Distance (KID) of 0.0023 pm 0.0007 across all categories. Training the vision--language anomaly detection model AA-CLIP on E-SCDD, compared to the SCDD dataset, improves pixel-level AUC and average precision by 1.70 and 8.34 points, respectively.

  • 6 authors
·
Nov 12, 2025

Harnessing Structural Disorder: Unraveling Hydrogen Evolution in Monolayer Amorphous Carbon via First-Principles Simulations and Machine-Learned Potentials

Disorder and defective coordination in the catalytic plane are crucial for enhancing the Hydrogen Evolution Reaction (HER) on two-dimensional catalysts. Amorphous materials are disordered, making them catalytically adaptive for many reactions. In this work, the HER capabilities of Monolayer Amorphous Carbon (MAC) were studied in comparison with crystalline carbon derivatives, such as pristine graphene (GE) and graphyne derivatives. MAC generated from melt-quench simulations revealed a diverse framework of predominantly sp2 and sp3 carbons with numerous 5-, 6-, and 7-membered rings. Density Functional Theory (DFT) calculations investigated free-energy variations in hydrogen adsorption for each material. According to Sabatier's principle, optimum activity is achieved when the Gibbs free energy (Delta GH) change approaches zero. Crystalline carbon materials possess limited active sites, with beta-graphyne showing the best Delta GH value of +0.34 eV. The adsorption study for MAC was conducted in 30 distinct local environments, where core structural properties were analyzed against varying radii. Calculations showed a Delta GH distribution for MAC ranging from -0.02 eV to +1.35 eV. To evaluate activity across the entire MAC surface, a MACE MLIP foundation model was finetuned, achieving optimal energy and force fitting of 1.67 meV/atom and 29.15 meV/A, respectively. The MLIP predicted Delta GH values from -0.91 eV to +1.70 eV, with approximately 15% of sites exhibiting values below +0.25 eV. Feature analysis revealed that 7-membered rings, curvature, and ripple height enhance HER activity. Our findings suggest that, with careful optimization of local features, MAC can be tuned to compete with noble metal catalysts.

  • 3 authors
·
May 7

Contraction and expansion effects on the substitution-defect properties of thirteen alloying elements in bcc Fe

Proposed as blanket structural materials for fusion power reactors, reduced activation ferritic/martensitic (RAFM) steel undergoes volume expanding and contracting in a cyclic mode under service environment. Particularly, being subjected to significant fluxes of fusion neutrons RAFM steel suffers considerable local volume variations in the radiation damage involved regions. It is necessary to study the structure properties of the alloying elements in contraction and expansion states. In this paper we studied local substitution structures of thirteen alloying elements Al, Co, Cr, Cu, Mn, Mo, Nb, Ni, Si, Ta, Ti, V, and W in bcc Fe and calculated their substitutional energies in the volume variation range from -1.0% to 1.0%. From the structure relaxation results of the first five neighbor shells around the substitutional atom we find the relaxation in each neighbor shell keeps approximately uniform within the volume variation from -1.0% to 1.0% except those of Mn and the relaxation of the fifth neighbor shell is stronger than that of the third and forth, indicating that the lattice distortion due to the substitution atom is easier to spread in <111> direction than in other direction. The relaxation pattern and intensity are related to the size and electron structure of the substitutional atom. For some alloying elements, such as Mo, Nb, Ni, Ta, Ti and W, the substitutional energy decreases noticeably when the volume increases. Further analysis show that the substitutional energy comprises the energy variation originated from local structure relaxation and the chemical potential difference of the substitutional atom between its elemental crystalline state and the solid solution phase in bcc Fe. We think the approximately uniform relaxation of each neighbor shell around a substitutional atom give rise to a linear decrease in the substitutional energy with the increasing volume.

  • 16 authors
·
Aug 17, 2010

Examining the Source of Defects from a Mechanical Perspective for 3D Anomaly Detection

In this paper, we explore a novel approach to 3D anomaly detection (AD) that goes beyond merely identifying anomalies based on structural characteristics. Our primary perspective is that most anomalies arise from unpredictable defective forces originating from both internal and external sources. To address these anomalies, we seek out opposing forces that can help correct them. Therefore, we introduce the Mechanics Complementary Model-based Framework for the 3D-AD task (MC4AD), which generates internal and external corrective forces for each point. We first propose a Diverse Anomaly-Generation (DA-Gen) module designed to simulate various types of anomalies. Next, we present the Corrective Force Prediction Network (CFP-Net), which uses complementary representations for point-level analysis to simulate the different contributions from internal and external corrective forces. To ensure the corrective forces are constrained effectively, we have developed a combined loss function that includes a new symmetric loss and an overall loss. Notably, we implement a Hierarchical Quality Control (HQC) strategy based on a three-way decision process and contribute a dataset titled Anomaly-IntraVariance, which incorporates intraclass variance to evaluate our model. As a result, the proposed MC4AD has been proven effective through theory and experimentation. The experimental results demonstrate that our approach yields nine state-of-the-art performances, achieving optimal results with minimal parameters and the fastest inference speed across five existing datasets, in addition to the proposed Anomaly-IntraVariance dataset. The source is available at https://github.com/hzzzzzhappy/MC4AD

  • 6 authors
·
May 9, 2025

Robustness of the Verwey transition against remanent strain-induced defects in magnetite

The Verwey transition in magnetite is a benchmark electronically driven phase transition that is highly sensitive to lattice imperfections and external perturbations. Doping, deviations from oxygen stoichiometry, and irradiation-induced point defects are known to lower the Verwey transition temperature, T_{rm V}. By contrast, the role of remanent strain fields and extended defect structures generated by uniaxial stress has remained largely unexplored. Here we combine dark-field x-ray microscopy (DFXM) and ac magnetic susceptibility to determine how strain-induced defects affect the Verwey transition in stoichiometric single-crystalline magnetite after uniaxial compression and unloading. The DFXM measurements were performed on two samples compressed along the same [011] direction: loading to 200~MPa generated stable line-like defects and remanent strain fields, whereas loading beyond the fracture threshold produced denser defect networks and mechanical fracture. To test the effect of a different loading geometry, we also measured the ac susceptibility of a sample fractured by compression along [001]. Real-space DFXM imaging, lattice-orientation mapping, and residual strain mapping show substantial remanent structural disorder after compression. Nevertheless, neither the transition temperature T_{rm V} nor the sharpness of the transition changes measurably in any of the compressed or fractured samples. This behavior contrasts with the strong suppression of T_{rm V} by point-like disorder. Our results show that extended line-like defects and remanent strain fields produced by plastic deformation do not measurably perturb the macroscopic electronic ordering responsible for the Verwey transition, thereby distinguishing the effects of point defects from those of extended slip-related defects in magnetite.

  • 19 authors
·
Sep 30

A Cumulative Framework for Solid Deformation

A cumulative variational framework for solid deformation is proposed. Its central organizing principle is the recursive combination of three structural components of one material body: a compatible Cosserat component, a distributed-incompatibility component, and a defect-source component. At any prescribed external condition these components constitute a combined material state. They are governed under common physical boundary and initial conditions and are coupled through one cumulative energy and the associated field equations. They are not separate boundary-value problems and need not appear in a prescribed temporal sequence. The cumulative character of the framework concerns the response of the combined state to variation of externally prescribed conditions. For the special case of an initially perfect body, loss of stability may produce successive branches with defect and then source participation. Such a sequence is a bifurcation property of the selected initial state and constitutive energy, rather than a defining hierarchy of the framework. A one-dimensional specialization illustrates structural bifurcation, residual deformation and residual stress produced by retained structure, dependence on the initial combined state, directional memory under reverse loading, parametric cumulative hysteresis, and changes of observable tangent stiffness associated with structural stabilization. A spatial extension introduces defect and source gradient terms and yields a size-dependent structural stability operator. For the stable quartic energy considered, the gradient terms regularize nonuniform perturbations but do not by themselves generate a finite-wavelength localization instability on an already stable three-component branch. The examples thereby distinguish consequences of the cumulative structure and energy from phenomena requiring additional constitutive evolution laws.

  • 1 authors
·
Sep 16

The Responsibility Vacuum: Organizational Failure in Scaled Agent Systems

Modern CI/CD pipelines integrating agent-generated code exhibit a structural failure in responsibility attribution. Decisions are executed through formally correct approval processes, yet no entity possesses both the authority to approve those decisions and the epistemic capacity to meaningfully understand their basis. We define this condition as responsibility vacuum: a state in which decisions occur, but responsibility cannot be attributed because authority and verification capacity do not coincide. We show that this is not a process deviation or technical defect, but a structural property of deployments where decision generation throughput exceeds bounded human verification capacity. We identify a scaling limit under standard deployment assumptions, including parallel agent generation, CI-based validation, and individualized human approval gates. Beyond a throughput threshold, verification ceases to function as a decision criterion and is replaced by ritualized approval based on proxy signals. Personalized responsibility becomes structurally unattainable in this regime. We further characterize a CI amplification dynamic, whereby increasing automated validation coverage raises proxy signal density without restoring human capacity. Under fixed time and attention constraints, this accelerates cognitive offloading in the broad sense and widens the gap between formal approval and epistemic understanding. Additional automation therefore amplifies, rather than mitigates, the responsibility vacuum. We conclude that unless organizations explicitly redesign decision boundaries or reassign responsibility away from individual decisions toward batch- or system-level ownership, responsibility vacuum remains an invisible but persistent failure mode in scaled agent deployments.

  • 2 authors
·
Jan 21 2

SolarFCD: A Large-Scale Dataset and Benchmark for Solar Fault Classification in Photovoltaic Systems

The increasing global deployment of solar photovoltaic (PV) systems needs robust, scalable, and automated inspection technologies capable of detecting a wide range of panel flaws under a variety of operating situations. The lack of large-scale, multi-modal, publicly available annotated datasets is a major obstacle preventing advancement in this field. We introduce SolarFCD, an extensive dataset of solar panel defects created by methodically combining and reconciling three publicly accessible datasets covering two imaging modalities: RGB/Drone images and Thermal Infrared. The dataset consist of 4,435 images arranged under four unified defect classes such as: healthy images, Surface Obstruction, structural fault, and electrical fault. The dataset was divided into training, validation, and test splits at an 80:10:10 ratio through methodical label mapping, near-duplicate removal, and targeted augmentation of minority classes. Sixteen classification architectures from five design families were trained and assessed on the dataset to provide repeatable benchmark baselines. With an accuracy of 86.68%, precision of 88.65%, recall of 88.62%, and F1-score of 88.17%, ResNet101V2 performed the best overall. Per-class results showed balanced detection across all four defect categories within a narrow performance band of less than 1.2 percentage points. To promote open and repeatable research in automated PV inspection and solar energy operations and maintenance, the dataset, annotation files, and baseline code are made openly available.

  • 7 authors
·
Apr 25

When Self-Evolution Backfires: Pre-Commit Gating against Skill Contamination in LLM Agents

Self-evolving agents accumulate capability by distilling reusable skills from their execution trajectories, but we find this process is not monotonic: past a critical pool size, newly added skills degrade performance instead of improving it. We formalize this capability-contamination phase transition and trace it to a structural cause: once a defective skill enters the decision context, it becomes reference material for distilling later skills, forming cross-round contamination chains. We further show the contamination is structurally irreversible: removing a source skill after the fact cannot erase the flawed reasoning its descendants have already inherited, so post-hoc rollback recovers only a small fraction of the lost performance. This makes skill admission a pre-commit necessity rather than a post-hoc fix, and motivates Verifier-as-Gatekeeper (VaG): a progressive trust hierarchy whose three heterogeneous critics - structural validity, behavioral harmlessness, and semantic consistency - filter each skill individually, coupled with a marginal-gain subset selection that removes combinatorial contamination at the top tier before skills reach the runtime context. On Terminal-Bench 2, unconditional accumulation rises to a peak and then degrades, giving back most of its gains as the pool keeps growing, and post-hoc removal of the culprit skills recovers only a small part of the drop - the empirical signature of irreversibility. In contrast, VaG improves every round, reaching 72% pass@1 with a pool roughly 5x smaller, and its frozen skill pool transfers positively to four other backbones and a second benchmark without re-evolution. Ablations confirm the three critics are complementary and mutually non-substitutable, each intercepting a largely disjoint class of harmful skills.

  • 7 authors
·
Sep 16

Microstructure quality control of steels using deep learning

In quality control, microstructures are investigated rigorously to ensure structural integrity, exclude the presence of critical volume defects, and validate the formation of the target microstructure. For quenched, hierarchically-structured steels, the morphology of the bainitic and martensitic microstructures are of major concern to guarantee the reliability of the material under service conditions. Therefore, industries conduct small sample-size inspections of materials cross-sections through metallographers to validate the needle morphology of such microstructures. We demonstrate round-robin test results revealing that this visual grading is afflicted by pronounced subjectivity despite the thorough training of personnel. Instead, we propose a deep learning image classification approach that distinguishes steels based on their microstructure type and classifies their needle length alluding to the ISO 643 grain size assessment standard. This classification approach facilitates the reliable, objective, and automated classification of hierarchically structured steels. Specifically, an accuracy of 96% and roughly 91% is attained for the distinction of martensite/bainite subtypes and needle length, respectively. This is achieved on an image dataset that contains significant variance and labeling noise as it is acquired over more than ten years from multiple plants, alloys, etchant applications, and light optical microscopes by many metallographers (raters). Interpretability analysis gives insights into the decision-making of these models and allows for estimating their generalization capability.

  • 5 authors
·
Jun 1, 2023

ATANT v1.1: Positioning Continuity Evaluation Against Memory, Long-Context, and Agentic-Memory Benchmarks

ATANT v1.0 (arXiv:2604.06710) defined continuity as a system property with 7 required properties and introduced a 10-checkpoint, LLM-free evaluation methodology validated on a 250-story corpus. Since publication, a recurring reviewer and practitioner question has concerned not the framework itself but its relationship to a wider set of memory evaluations: LOCOMO, LongMemEval, BEAM, MemoryBench, Zep's evaluation suite, Letta/MemGPT's evaluations, and RULER. This companion paper, v1.1, does not modify the v1.0 standard. It closes a related-work gap that v1.0 left brief under page limits. We show by structural analysis that none of these benchmarks measures continuity as defined in v1.0: of the 7 required properties, the median existing eval covers 1 property, the mean covers 0.43 when partial credit is scored at 0.5, and no eval covers more than 2. We provide a cell-by-cell property-coverage matrix, identify methodological defects specific to each benchmark (including an empty-gold scoring bug in the LOCOMO reference implementation that renders 23% of its corpus unscorable by construction), and publish our reference implementation's LOCOMO score (8.8%) alongside the structural reason that number is uninformative about continuity. We publish our 8.8% LOCOMO score alongside our 96% ATANT cumulative-scale score as a calibration pair: the 87-point divergence is evidence that the two benchmarks measure different properties, not that one system is an order of magnitude better than another. The position v1.1 takes is not adversarial: each benchmark measures a real capability. The claim is that none of them can adjudicate continuity, and conflating them with continuity evaluation has led the field to under-invest in the properties v1.0 names.

  • 1 authors
·
Apr 12

CMDS-AD: Cross-Modal Dual-Stream Decoupling for Few-Shot Anomaly Detection

Few-shot anomaly detection remains challenging due to limited training data. Multi-modal anomaly detection (MAD) offers a viable solution, leveraging 3D geometric cues to enrich 2D RGB representations and compensate for this scarcity. However, existing MAD methods apply spatially uniform feature processing, conflating stable macroscopic structures with high-frequency localized defect signals, exacerbating cross-modal misalignment and inflating false-positive rates. To overcome this, we present CMDS-AD, a Cross-Modal Dual-Stream Anomaly Detection framework. A LoRA-guided diffusion model generates diverse RGB samples to mitigate extreme data scarcity. For 3D normal augmentation, we employ a pre-trained diffusion model as a normal estimator. Crucially, this estimator inherently acts as a non-linear low-pass filter, directly extracting low-frequency normal representations from RGB inputs. This establishes an auxiliary estimated stream of purely low-frequency information, anchoring robust structural templates and assisting the uncompressed real stream, containing coupled high- and low-frequency components, to precisely isolate micro-defects. A Coordinate-Aware Hierarchical Feature Mapper adaptively aligns cross-modal semantics, while a multiplicative scoring mechanism filters modality-specific noise. Under the extreme 1-shot setting, CMDS-AD achieves absolute performance gains of 5.7% (I-AUROC) and 2.0% (AUPRO) on MVTec 3D-AD, alongside 7.7% and 5.6% improvements on EyeCandies, establishing a new state-of-the-art. Code is available at https://github.com/Junhaocai27/CMDS-AD

  • 7 authors
·
Jun 23

1D-Bench: A Benchmark for Iterative UI Code Generation with Visual Feedback in Real-World

Design-to-code translates high-fidelity UI designs into executable front-end implementations, but progress remains hard to compare due to inconsistent datasets, toolchains, and evaluation protocols. We introduce 1D-Bench, a benchmark grounded in real e-commerce workflows, where each instance provides a reference rendering and an exported intermediate representation that may contain extraction errors. 1D is short for one day, representing the efficient completion of design-to-code tasks in less than one day. Models take both as input, using the intermediate representation as structural cues while being evaluated against the reference rendering, which tests robustness to intermediate representation defects rather than literal adherence. 1D-Bench requires generating an executable React codebase under a fixed toolchain with an explicit component hierarchy, and defines a multi-round setting in which models iteratively apply component-level edits using execution feedback. Experiments on commercial and open-weight multimodal models show that iterative editing generally improves final performance by increasing rendering success and often improving visual similarity. We further conduct a pilot study on post-training with synthetic repair trajectories and reinforcement learning based editing, and observe limited and unstable gains that may stem from sparse terminal rewards and high-variance file-level updates. The data and scripts used in this study are available in an anonymized repository at https://anonymous.4open.science/r/d2c-benchmark-A9C4/.

  • 4 authors
·
Jul 14

TextRefine: Improving Textual Fidelity, Spatial Placement, and Glyph Rendering for Text Editing in Product Posters

Text editing in product posters entails inserting new text or replacing existing text while preserving product appearance, background content, and global composition. Despite recent progress in instruction-based image editing, general-purpose models remain unreliable in this setting: they often omit or incorrectly render the target text, place it over salient products or pre-existing content, and produce structurally distorted or visually inconsistent glyphs. We introduce TextRefine, a task-aligned post-training framework that combines supervised fine-tuning with operation-specific reward optimization to address these complementary failure modes. For text insertion, our text-span-level reward jointly assesses semantic fidelity and target-span coverage, penalizes spatial conflicts with products and existing text, and employs a gated structural constraint to preserve non-text regions. For text replacement, our glyph-level reward leverages the connectionist temporal classification (CTC) posterior of the target character to provide graded supervision for fine-grained defects, including missing strokes, structural deformations, and confusion among visually similar characters. We further introduce OpenTextEdit, a dataset comprising 100K images for text editing in product posters, with multi-text layouts, detailed text attributes, product masks, and challenging low-frequency characters. Extensive experiments on both insertion and replacement demonstrate that TextRefine consistently outperforms the evaluated image editing baselines in textual fidelity, placement reliability, and glyph quality while better preserving source-image content.

  • 14 authors
·
Aug 19

Real-Time Structural Deflection Estimation in Hydraulically Actuated Systems Using 3D Flexible Multibody Simulation and DNNs

The precision, stability, and performance of lightweight high-strength steel structures in heavy machinery is affected by their highly nonlinear dynamics. This, in turn, makes control more difficult, simulation more computationally intensive, and achieving real-time autonomy, using standard approaches, impossible. Machine learning through data-driven, physics-informed and physics-inspired networks, however, promises more computationally efficient and accurate solutions to nonlinear dynamic problems. This study proposes a novel framework that has been developed to estimate real-time structural deflection in hydraulically actuated three-dimensional systems. It is based on SLIDE, a machine-learning-based method to estimate dynamic responses of mechanical systems subjected to forced excitations.~Further, an algorithm is introduced for the data acquisition from a hydraulically actuated system using randomized initial configurations and hydraulic pressures.~The new framework was tested on a hydraulically actuated flexible boom with various sensor combinations and lifting various payloads. The neural network was successfully trained in less time using standard parameters from PyTorch, ADAM optimizer, the various sensor inputs, and minimal output data. The SLIDE-trained neural network accelerated deflection estimation solutions by a factor of 10^7 in reference to flexible multibody simulation batches and provided reasonable accuracy. These results support the studies goal of providing robust, real-time solutions for control, robotic manipulators, structural health monitoring, and automation problems.

  • 6 authors
·
Mar 10, 2025

Structural Representations for Cross-Attack Generalization in AI Agent Threat Detection

Autonomous AI agents executing multi-step tool sequences face semantic attacks that manifest in behavioral traces rather than isolated prompts. A critical challenge is cross-attack generalization: can detectors trained on known attack families recognize novel, unseen attack types? We discover that standard conversational tokenization -- capturing linguistic patterns from agent interactions -- fails catastrophically on structural attacks like tool hijacking (AUC 0.39) and data exfiltration (AUC 0.46), while succeeding on linguistic attacks like social engineering (AUC 0.78). We introduce structural tokenization, encoding execution-flow patterns (tool calls, arguments, observations) rather than conversational content. This simple representational change dramatically improves cross-attack generalization: +46 AUC points on tool hijacking, +39 points on data exfiltration, and +71 points on unknown attacks, while simultaneously improving in-distribution performance (+6 points). For attacks requiring linguistic features, we propose gated multi-view fusion that adaptively combines both representations, achieving AUC 0.89 on social engineering without sacrificing structural attack detection. Our findings reveal that AI agent security is fundamentally a structural problem: attack semantics reside in execution patterns, not surface language. While our rule-based tokenizer serves as a baseline, the structural abstraction principle generalizes even with simple implementation.

  • 1 authors
·
Jan 4

LLM-Powered Text-Attributed Graph Anomaly Detection via Retrieval-Augmented Reasoning

Anomaly detection on attributed graphs plays an essential role in applications such as fraud detection, intrusion monitoring, and misinformation analysis. However, text-attributed graphs (TAGs), in which node information is expressed in natural language, remain underexplored, largely due to the absence of standardized benchmark datasets. In this work, we introduce TAG-AD, a comprehensive benchmark for anomaly node detection on TAGs. TAG-AD leverages large language models (LLMs) to generate realistic anomalous node texts directly in the raw text space, producing anomalies that are semantically coherent yet contextually inconsistent and thus more reflective of real-world irregularities. In addition, TAG-AD incorporates multiple other anomaly types, enabling thorough and reproducible evaluation of graph anomaly detection (GAD) methods. With these datasets, we further benchmark existing unsupervised GNN-based GAD methods as well as zero-shot LLMs for GAD. As part of our zero-shot detection setup, we propose a retrieval-augmented generation (RAG)-assisted, LLM-based zero-shot anomaly detection framework. The framework mitigates reliance on brittle, hand-crafted prompts by constructing a global anomaly knowledge base and distilling it into reusable analysis frameworks. Our experimental results reveal a clear division of strengths: LLMs are particularly effective at detecting contextual anomalies, whereas GNN-based methods remain superior for structural anomaly detection. Moreover, RAG-assisted prompting achieves performance comparable to human-designed prompts while eliminating manual prompt engineering, underscoring the practical value of our RAG-assisted zero-shot LLM anomaly detection framework.

  • 13 authors
·
Nov 15, 2025

TMUAD: Enhancing Logical Capabilities in Unified Anomaly Detection Models with a Text Memory Bank

Anomaly detection, which aims to identify anomalies deviating from normal patterns, is challenging due to the limited amount of normal data available. Unlike most existing unified methods that rely on carefully designed image feature extractors and memory banks to capture logical relationships between objects, we introduce a text memory bank to enhance the detection of logical anomalies. Specifically, we propose a Three-Memory framework for Unified structural and logical Anomaly Detection (TMUAD). First, we build a class-level text memory bank for logical anomaly detection by the proposed logic-aware text extractor, which can capture rich logical descriptions of objects from input images. Second, we construct an object-level image memory bank that preserves complete object contours by extracting features from segmented objects. Third, we employ visual encoders to extract patch-level image features for constructing a patch-level memory bank for structural anomaly detection. These three complementary memory banks are used to retrieve and compare normal images that are most similar to the query image, compute anomaly scores at multiple levels, and fuse them into a final anomaly score. By unifying structural and logical anomaly detection through collaborative memory banks, TMUAD achieves state-of-the-art performance across seven publicly available datasets involving industrial and medical domains. The model and code are available at https://github.com/SIA-IDE/TMUAD.

  • 6 authors
·
Aug 28, 2025

Feature Lottery? A Bifurcation Theory of Concept Emergence

Neural networks acquire structured representations at specific moments during training, yet identifying these transitions typically relies on retrospective, label-dependent metrics. We introduce a bifurcation theory of representation dynamics to detect these moments in real time. Analyzing a passive GMM probe attached to the evolving encoder, we show the onset of structure corresponds to a supercritical pitchfork bifurcation driven by the loss Hessian. The system exhibits a theoretically predictable zero-crossing (β_c) that, compared to the network's current state (β), yields a dynamic ratio β(t)/β_c(t): a universal, label-free phase coordinate for representation dynamics, computable entirely from hidden states. We empirically validate four distinct transition regimes predicted by this coordinate across diverse settings: SAEs on language models (Pythia), SSL (CIFAR), and grokking (modular arithmetic). Crucially, under finite dissipation, macroscopic symmetry-breaking can lag the initial zero-crossing by orders of magnitude, which providing a rigorous dynamical account of the delayed escape observed in grokking. Microscopically, the bifurcation creates a shared unstable subspace, forcing collective symmetry breaking. We term this the "feature lottery" in SAE training: a feature's terminal interpretability becomes predictable remarkably early. By only 5% of training, early atom purity robustly predicts final convergence purity, with top-decile early atoms achieving over 12x the baseline purity at convergence. Beyond explaining concept emergence, β/β_c provides a practical early-warning indicator for training health, detecting the onset of usable structure, the crystallization of feature identity, and representational collapse epochs before downstream metrics react.

  • 1 authors
·
May 21

Edge Computing in Distributed Acoustic Sensing: An Application in Traffic Monitoring

Distributed acoustic sensing (DAS) technology leverages fiber optic cables to detect vibrations and acoustic events, which is a promising solution for real-time traffic monitoring. In this paper, we introduce a novel methodology for detecting and tracking vehicles using DAS data, focusing on real-time processing through edge computing. Our approach applies the Hough transform to detect straight-line segments in the spatiotemporal DAS data, corresponding to vehicles crossing the Astfjord bridge in Norway. These segments are further clustered using the Density-based spatial clustering of applications with noise (DBSCAN) algorithm to consolidate multiple detections of the same vehicle, reducing noise and improving accuracy. The proposed workflow effectively counts vehicles and estimates their speed with only tens of seconds latency, enabling real-time traffic monitoring on the edge. To validate the system, we compare DAS data with simultaneous video footage, achieving high accuracy in vehicle detection, including the distinction between cars and trucks based on signal strength and frequency content. Results show that the system is capable of processing large volumes of data efficiently. We also analyze vehicle speeds and traffic patterns, identifying temporal trends and variations in traffic flow. Real-time deployment on edge devices allows immediate analysis and visualization via cloud-based platforms. In addition to traffic monitoring, the method successfully detected structural responses in the bridge, highlighting its potential use in structural health monitoring.

  • 3 authors
·
Oct 4, 2024

AGHI-QA: A Subjective-Aligned Dataset and Metric for AI-Generated Human Images

The rapid development of text-to-image (T2I) generation approaches has attracted extensive interest in evaluating the quality of generated images, leading to the development of various quality assessment methods for general-purpose T2I outputs. However, existing image quality assessment (IQA) methods are limited to providing global quality scores, failing to deliver fine-grained perceptual evaluations for structurally complex subjects like humans, which is a critical challenge considering the frequent anatomical and textural distortions in AI-generated human images (AGHIs). To address this gap, we introduce AGHI-QA, the first large-scale benchmark specifically designed for quality assessment of AGHIs. The dataset comprises 4,000 images generated from 400 carefully crafted text prompts using 10 state of-the-art T2I models. We conduct a systematic subjective study to collect multidimensional annotations, including perceptual quality scores, text-image correspondence scores, visible and distorted body part labels. Based on AGHI-QA, we evaluate the strengths and weaknesses of current T2I methods in generating human images from multiple dimensions. Furthermore, we propose AGHI-Assessor, a novel quality metric that integrates the large multimodal model (LMM) with domain-specific human features for precise quality prediction and identification of visible and distorted body parts in AGHIs. Extensive experimental results demonstrate that AGHI-Assessor showcases state-of-the-art performance, significantly outperforming existing IQA methods in multidimensional quality assessment and surpassing leading LMMs in detecting structural distortions in AGHIs.

  • 9 authors
·
Apr 30, 2025

Topology-Aware Optimization of Gaussian Primitives for Human-Centric Volumetric Videos

Volumetric video is emerging as a key medium for digitizing the dynamic physical world, creating the virtual environments with six degrees of freedom to deliver immersive user experiences. However, robustly modeling general dynamic scenes, especially those involving topological changes while maintaining long-term tracking remains a fundamental challenge. In this paper, we present TaoGS, a novel topology-aware dynamic Gaussian representation that disentangles motion and appearance to support, both, long-range tracking and topological adaptation. We represent scene motion with a sparse set of motion Gaussians, which are continuously updated by a spatio-temporal tracker and photometric cues that detect structural variations across frames. To capture fine-grained texture, each motion Gaussian anchors and dynamically activates a set of local appearance Gaussians, which are non-rigidly warped to the current frame to provide strong initialization and significantly reduce training time. This activation mechanism enables efficient modeling of detailed textures and maintains temporal coherence, allowing high-fidelity rendering even under challenging scenarios such as changing clothes. To enable seamless integration into codec-based volumetric formats, we introduce a global Gaussian Lookup Table that records the lifespan of each Gaussian and organizes attributes into a lifespan-aware 2D layout. This structure aligns naturally with standard video codecs and supports up to 40 compression. TaoGS provides a unified, adaptive solution for scalable volumetric video under topological variation, capturing moments where "elegance in motion" and "Power in Stillness", delivering immersive experiences that harmonize with the physical world.

  • 12 authors
·
Sep 9, 2025

Smart Cellular Bricks for Decentralized Shape Classification and Damage Recovery

Biological systems possess remarkable capabilities for self-recognition and morphological regeneration, often relying solely on local interactions. Inspired by these decentralized processes, we present a novel system of physical 3D bricks--simple cubic units equipped with local communication, processing, and sensing--that are capable of inferring their global shape class and detecting structural damage. Leveraging Neural Cellular Automata (NCA), a learned, fully-distributed algorithm, our system enables each module to independently execute the same neural network without access to any global state or positioning information. We demonstrate the ability of collections of hundreds of these cellular bricks to accurately classify a variety of 3D shapes through purely local interactions. The approach shows strong robustness to out-of-distribution shape variations and high tolerance to communication faults and failed modules. In addition to shape inference, the same decentralized framework is extended to detect missing or damaged components, allowing the collective to localize structural disruptions and to guide a recovery process. This work provides a physical realization of large-scale, decentralized self-recognition and damage detection, advancing the potential of robust, adaptive, and bio-inspired modular systems. Videos and code will be made available at: https://cellularbricks.github.io/

  • 5 authors
·
Sep 24, 2025

LLM-as-a-Judge Scores Are Unreliable Optimization Signals in Closed-Loop Table Recognition

LLM-as-a-judge is widely used to provide feedback and selection signals in closedloop regeneration, but this use remains insufficiently validated. We study it in table recognition, where deterministic TEDS evaluation provides a controlled testbed, using FinTabNet and OmniDocBench. Three findings emerge. First, judge signals were weak on both datasets: scores frequently tied, rankings were not reproducible, and no tested judge score policy, whether selecting among candidates or accepting revisions under a conservative score margin, improved on the first output on both datasets. Iteration produced better candidates, but the judge recovered them at most partially on one dataset and not at all on the other. Second, severe losses occurred even without specific judge feedback, supporting target-preservation failure under unconstrained regeneration as a proximate mechanism. Third, a structure-preserving instruction reduced the severe-loss rate, significantly on FinTabNet and directionally on OmniDocBench, but produced no improvement, and in an exploratory 2x2 analysis this protection was not stably observed when judge feedback was retained. These results do not dispute the value of LLMs as evaluators, but show that the tested reference-free judge signals were too weak and unstable to drive candidate selection in this setup, and that evaluation-style evidence alone was insufficient to establish closed-loop optimization utility. Iterative refinement requires, at minimum, a verification signal that deterministically detects structural change, rather than judge scores alone.

  • 1 authors
·
Jul 15

AttackEval: A Systematic Empirical Study of Prompt Injection Attack Effectiveness Against Large Language Models

Prompt injection has emerged as a critical vulnerability in large language model (LLM) deployments, yet existing research is heavily weighted toward defenses. The attack side -- specifically, which injection strategies are most effective and why -- remains insufficiently studied.We address this gap with AttackEval, a systematic empirical study of prompt injection attack effectiveness. We construct a taxonomy of ten attack categories organized into three parent groups (Syntactic, Contextual, and Semantic/Social), populate each category with 25 carefully crafted prompts (250 total), and evaluate them against a simulated production victim system under four progressively stronger defense tiers. Experiments reveal several non-obvious findings: (1) Obfuscation (OBF) achieves the highest single-attack success rate (ASR = 0.76) against even intent-aware defenses, because it defeats both keyword matching and semantic similarity checks simultaneously; (2) Semantic/Social attacks - Emotional Manipulation (EM) and Reward Framing (RF) - maintain high ASR (0.44-0.48) against intent-aware defenses due to their natural language surface, which evades structural anomaly detection; (3) Composite attacks combining two complementary strategies dramatically boost ASR, with the OBF + EM pair reaching 97.6%; (4) Stealth correlates positively with residual ASR against semantic defenses (r = 0.71), implying that future defenses must jointly optimize for both structural and behavioral signals. Our findings identify concrete blind spots in current defenses and provide actionable guidance for designing more robust LLM safety systems.

  • 1 authors
·
Apr 4

Revisiting Graph Contrastive Learning on Anomaly Detection: A Structural Imbalance Perspective

The superiority of graph contrastive learning (GCL) has prompted its application to anomaly detection tasks for more powerful risk warning systems. Unfortunately, existing GCL-based models tend to excessively prioritize overall detection performance while neglecting robustness to structural imbalance, which can be problematic for many real-world networks following power-law degree distributions. Particularly, GCL-based methods may fail to capture tail anomalies (abnormal nodes with low degrees). This raises concerns about the security and robustness of current anomaly detection algorithms and therefore hinders their applicability in a variety of realistic high-risk scenarios. To the best of our knowledge, research on the robustness of graph anomaly detection to structural imbalance has received little scrutiny. To address the above issues, this paper presents a novel GCL-based framework named AD-GCL. It devises the neighbor pruning strategy to filter noisy edges for head nodes and facilitate the detection of genuine tail nodes by aligning from head nodes to forged tail nodes. Moreover, AD-GCL actively explores potential neighbors to enlarge the receptive field of tail nodes through anomaly-guided neighbor completion. We further introduce intra- and inter-view consistency loss of the original and augmentation graph for enhanced representation. The performance evaluation of the whole, head, and tail nodes on multiple datasets validates the comprehensive superiority of the proposed AD-GCL in detecting both head anomalies and tail anomalies.

  • 7 authors
·
Jul 18, 2025

SliceBridge: context-consistent repair of corrupted slice intervals in T1-weighted MRI

Structural magnetic resonance imaging (MRI) images are sometimes corrupted over a contiguous set of slices, where acquisition, motion, hardware, or reconstruction effects leave a single slice or short interval inconsistent with its neighbors while the rest of the image remains usable. Such localized corruption can bias downstream morphometric analysis, yet discarding or reacquiring an otherwise usable image is costly. We formulate this as an image restoration problem: given the location of the affected interval, reconstruct those slices from the surrounding anatomical and imaging context. We propose SliceBridge, a framework for restoring corrupted slice intervals in T1-weighted MRI using rectified flow matching conditioned on the surrounding intact slices and their relative slice positions. Through-plane consistency is encouraged by coupling the slices within the interval through interval-correlated initial noise, a shared flow time, and synchronized sampling. The restored interval is then inserted back, leaving all other slices unchanged. We trained and validated the model on 9,877 T1-weighted brain MRI volumes from four datasets and evaluated it on 581 external subjects using clean interval withholding and controlled corruptions. Compared with a matched model that reconstructed target slices independently, SliceBridge reduced error in slice-to-slice changes within repaired intervals by 32.9%-41.3% across interval lengths and achieved higher SSIM at every interval length. In controlled-corruption cases, SliceBridge reduced the median error in regional brain volume estimates produced by a downstream segmentation model from 1.95% in corrupted volumes to 1.05%.

Comprehensive Robustness Analysis of LiDAR-based 3D Object Detection in Autonomous Driving

Recent advancements in LiDAR-only 3D object detection have demonstrated improved detection accuracy over benchmark datasets. However, the adversarial robustness of these models remains untested. Very few adversarial robustness studies exist for LiDAR-only 3D object detection and unfortunately, even they are limited to legacy models. Moreover, there is a systemic gap in the existing evaluation frameworks that rely simply on mAP ignoring other structural and predictive factors. To fill this gap, we propose a holistic framework that evaluates adversarial robustness using two structural factors (point cloud density and point cloud localization) and three predictive factors (misclassification, localization error, distance from ego). Using this framework, we perform an empirical study and critical analysis on recent and legacy state-of-the-art models using adversarial attacks specifically designed for LiDAR-based models. Our key finding is that high-capacity, voxel-based detectors are more susceptible to structured coordinate perturbations than pillar-based detectors. Additionally, non-anchor-based detectors demonstrate poor adversarial robustness, which necessitates rethinking model training techniques. Overall, our results demonstrate that recent models are as vulnerable to adversarial attacks as their predecessors. Therefore, we argue that there is a need to improve the evaluation benchmarks for 3D object detection that not only reward architectural modifications for improving detection accuracy, but also evaluate whether the design choices improve adversarial robustness.

  • 5 authors
·
Jul 2

General teleparallel geometric theory of defects

We revisit the geometric theory of defects. In the differential-geometric models of defects that have been adopted since the 1950s, dislocations have been associated with torsion, disclinations with the full curvature, and point defects with the first kind trace of non-metricity. The mainstream formulation exhibits several conceptual and technical shortcomings, most notably a hierarchy inconsistency, the non-exictence of a genuine metric formulation, and the potential emergence of Ostrogradsky-type instabilities. These issues have motivated us to develop a new framework, namely a generalized teleparallel geometric theory of defects. In our model, dislocations are identified with the trace of torsion, disclinations with the second kind trace of the non-metricity, and point defects with the first kind trace of the non-metricity. In addition, we retain the scalar part torsion as a free parameter for describing some possible unknown degrees of freedom in the theory of defects. The proposed geometric theory of defects is free from all of the aforementioned drawbacks and is therefore worthy of further investigation. To ensure the coherence and completeness of the discussion, we begin our analysis with elastic deformations, then summarize the existing metric-affine geometric theory of defects, and finally proceed to our original contribution, namely the new theory introduced here. We formulate the entire theory in Eulerian coordinates. Naturally, all results can be reformulated in Lagrangian coordinates as well. All analyses and formulae are expressed in the language of exterior algebra and are carried out in coordinate-independent orthonormal frames.

  • 3 authors
·
Feb 1

Creation of single vacancies in hBN with electron irradiation

Understanding electron irradiation effects is vital not only for reliable transmission electron microscopy characterization, but increasingly also for the controlled manipulation of two-dimensional materials. The displacement cross sections of monolayer hBN are measured using aberration-corrected scanning transmission electron microscopy in near ultra-high vacuum at primary beam energies between 50 and 90 keV. Damage rates below 80 keV are up to three orders of magnitude lower than previously measured at edges under poorer residual vacuum conditions where chemical etching appears to have been dominant. Notably, is possible to create single vacancies in hBN using electron irradiation, with boron almost twice as likely as nitrogen to be ejected below 80 keV. Moreover, any damage at such low energies cannot be explained by elastic knock-on, even when accounting for vibrations of the atoms. A theoretical description is developed to account for lowering of the displacement threshold due to valence ionization resulting from inelastic scattering of probe electrons, modelled using charge-constrained density functional theory molecular dynamics. Although significant reductions are found depending on the constrained charge, quantitative predictions for realistic ionization states are currently not possible. Nonetheless, there is potential for defect-engineering of hBN at the level of single vacancies using electron irradiation.

  • 9 authors
·
Mar 1, 2023