PrunaAI/P-Q-Image-2.1-Remove-Object-Comfy

     

⚡ P-Q-Image-2.1-Remove-Object

Object removal LoRAs for Qwen-Image-2.1 that leave the rest of the image untouched — ComfyUI

6 or 8 steps  ·  No CFG  ·  Mask optional  ·  Ready-to-use workflows

Built with Qwen.

P-Q-Image-2.1-Remove-Object is a set of LoRA adapters for Qwen/Qwen-Image-2.1 that remove the object you point at, and change nothing else. Mark the object with a mask (painted in ComfyUI's MaskEditor or loaded from a file), write what to remove, and the object is replaced by what would be behind it. The rest of the image stays as it was.

This repository is the ComfyUI export of PrunaAI/P-Q-Image-2.1-Remove-Object, with ready-to-use workflows, an example and a small custom node. The few-step variants run on top of PrunaAI's distillation LoRAs from PrunaAI/P-Q-Image-2.1-Comfy.

"Remove the phone and the raised arm holding it." The example the workflows open with, 6-step workflow as shipped. Photo: Aliaksei Antropau, Unsplash.

Variants

Pick 6-step as the default (recommended), or base to avoid the few-step model's drift.

Variant	File	Distillation LoRA (PrunaAI/P-Q-Image-2.1-Comfy)	Steps	Strength	Workflow
6-step	p_q_image_2.1_remove_object_6_steps_v0.1_comfyui_bf16.safetensors	p_q_image_2.1_6_steps_v0.2_comfyui_bf16.safetensors	6	0.7	workflows/p_q_image_2.1_remove_object_v0.1_6step.json
8-step	p_q_image_2.1_remove_object_8_steps_v0.1_comfyui_bf16.safetensors	p_q_image_2.1_8_steps_v0.1_comfyui_bf16.safetensors	8	0.7	workflows/p_q_image_2.1_remove_object_v0.1_8step.json
base	p_q_image_2.1_remove_object_base_v0.1_comfyui_bf16.safetensors	none (base model alone)	40	1.0	none

"Strength" is the adapter weight of this LoRA; the distillation LoRA always runs at 1.0. The few-step variants are made to run on top of the matching distillation LoRA, with its own step count and sigmas, without CFG: the workflows set all of this. The weights are those of PrunaAI/P-Q-Image-2.1-Remove-Object, converted to ComfyUI's LoRA format (bf16).

Quickstart

1. Update ComfyUI to a version with native Qwen-Image-2.1 support.

2. Download the models from Comfy-Org/Qwen-Image-2.1, PrunaAI/P-Q-Image-2.1-Comfy and this repo (each workflow's Model links note has the direct links):

   📂 ComfyUI/
   ├── 📂 custom_nodes/
   │   └── 📂 precise_removal_outline/                  (this repo)
   ├── 📂 input/
   │   └── p_q_image_2.1_remove_object_example.png      (this repo, examples/)
   └── 📂 models/
       ├── 📂 diffusion_models/
       │   └── qwen_image_2.1_int8_convrot.safetensors
       ├── 📂 loras/
       │   ├── p_q_image_2.1_6_steps_v0.2_comfyui_bf16.safetensors
       │   └── p_q_image_2.1_remove_object_6_steps_v0.1_comfyui_bf16.safetensors   (this repo)
       ├── 📂 text_encoders/
       │   ├── qwen3vl_8b_int8_convrot.safetensors
       │   └── qwen3.5_9b_qwen_image_2.1_pe_i2i.int8_convrot.safetensors
       └── 📂 vae/
           └── qwen_image_2.1_vae_bf16.safetensors
   

   For the 8-step variant, use the two 8-step LoRAs instead. The prompt-enhancer model (qwen3.5_9b…) is switched off in the workflows, but ComfyUI checks that it is present.

3. Install the custom node: copy precise_removal_outline/ into ComfyUI/custom_nodes/, install its requirements.txt (opencv) into ComfyUI's Python and restart ComfyUI. It adds the Precise Removal Outline node (category Pruna).

4. Open a workflow: drag workflows/p_q_image_2.1_remove_object_v0.1_6step.json (or the 8-step one) onto ComfyUI and press Run. It opens on the example above, with the mask already painted.

Using the workflow

• Load Image: your photo.
• Mask (optional): right-click Load Image, Open in MaskEditor, paint over the object, Save. Or load a mask file: select the greyed-out Load Mask from file node, press Ctrl+B (Cmd+B on Mac) to switch it on, and pick the file (white = the object, black = keep, any size). With both, they are combined. Without a mask, the instruction alone says what to remove.
• Precise Removal Outline: the instruction, e.g. "Remove the man on the left." With a mask, the node draws the outline exactly as expected by the model and adds the sentence that goes with it ("The area to edit is outlined in red. Remove the red outline as well.").
• Run. Image Compare shows your photo against the result (its slider needs ComfyUI's Nodes 2.0).

The edit box shows only seed and removal_strength; everything else is fixed inside it (double-click to see). The result has the photo's exact size: the model generates at the nearest multiples of 32 and the result is resized back.

Recommended settings

• The mask does not need to be exact. Rough, generous masks work. Include the object's shadow or reflection if they should go too, but keep the mask off anything that should stay.
• Name the object as it appears, and say which one when there are several similar ones ("the man on the right").
• Keep removal_strength at 0.7. Lower strengths reduce texture artifacts, but at 0.5 some removals fail (the object stays, recolored); much higher, the model also removes neighboring objects.
• Seed: fixed. If a removal leaves something behind, try another seed.

Limitations

• It can remove more than the outlined object, when the mask also covers part of something that should stay. Keep the mask tight where other things overlap the object.
• Textures in the filled area can look off: smoother than their surroundings, or with a faint regular grid. Photos well under 1 MP also keep less fine texture outside the mask.
• Only for removing objects. Other edits are not expected to work better than with the base model.

License

P-Q-Image-2.1-Remove-Object is a derivative of Qwen-Image-2.1 and follows the Qwen RESEARCH LICENSE AGREEMENT (copy in LICENSE, attribution in NOTICE). Review its use restrictions before using or redistributing the adapters. The few-step variants also need PrunaAI's distillation LoRA (PrunaAI/P-Q-Image-2.1-Comfy), whose own terms apply.

Qwen is licensed under the Qwen RESEARCH LICENSE AGREEMENT, Copyright (c) 2026 Hangzhou Tongyi Laboratory Technology Co., Ltd. All Rights Reserved.

The example photo is from Unsplash, under the Unsplash License. The Unsplash License does not cover people in a photo: the person in the example is seen from behind, in shadow, without a readable face.

What's next?

• Use P-Q-Image-2.1-Remove-Object to remove objects from photos with Qwen-Image-2.1 in a few steps.
• Compress your own models with Pruna and give us a ⭐️ for more efficiency!

Try our models